#1  
Old 03-01-2009, 10:47 AM
tempestwizz's Avatar
tempestwizz (Brian)
Registered User

tempestwizz is offline
 
Join Date: Jun 2005
Location: Vientiane, Laos
Posts: 201
Guiding with EQ6 Pro - PEC or not?

I am setting up an EQ6 Pro on the pier in my observatory with a view to using a 10" F5 (Suchting) newtonian style OTA.

I intend to guide the mount either via PHD, or the SBIG system, and was wondering if through guiding I do not need to worry about setting up the PEC on the EQ6.

Does anyone have any experience/comments?

BC
Reply With Quote
  #2  
Old 04-01-2009, 08:53 AM
TrevorW
Registered User

TrevorW is offline
 
Join Date: Aug 2006
Posts: 6,995
I'm guiding via PHD even without perfect polar alignment I've tried subs up to 3 minutes so far without ill affect so haven't yet resorted to PEC

Cheers
Reply With Quote
  #3  
Old 04-01-2009, 09:59 AM
bmitchell82's Avatar
bmitchell82 (Brendan)
Newtonian power! Love it!

bmitchell82 is offline
 
Join Date: Jul 2008
Location: Mandurah
Posts: 2,597
I say, if you have it use it, it can only help, and lowers the workload of the guiding system. especially if you have it set up on a pier!
Reply With Quote
  #4  
Old 04-01-2009, 10:05 AM
JohnG's Avatar
JohnG (John)
Looking Down From Above

JohnG is offline
 
Join Date: Dec 2005
Location: Cootamundra, NSW
Posts: 1,698
I have not had any experience with an EQ-6 but if it is going to be permanently mounted and you do a reasonable Drift Align I see no reason to do a PEC run, you are recording after the event.

Providing your PE is smooth and dosen't have sharp uncontrolled spikes, your autoguider will take care any PE. My previous mount, a G-11 and my current field mount, a GM-8, have PEC but I didn't/don't use it, my Observatory mount, a Tak NJP dosen't have PEC at all.

You can check your PE after you have set the mount up and done a DA by running PHD and using an autoguider and enabling the Graph under the Tools Menu, set it on 50 and watch the progress for a couple of worm rotations, you will clearly see any sharp spikes and you will see the autoguider responses.

Cheers
Reply With Quote
  #5  
Old 04-01-2009, 10:53 AM
xelasnave's Avatar
xelasnave
Gravity does not Suck

xelasnave is offline
 
Join Date: Mar 2005
Location: Tabulam
Posts: 12,930
In my humble opinion it is good to dial in with PE as it may point to balance issues perhaps... I train my mount frequently and somehow it helps me work out if there are other issues.
alex
Reply With Quote
  #6  
Old 05-01-2009, 07:35 AM
tempestwizz's Avatar
tempestwizz (Brian)
Registered User

tempestwizz is offline
 
Join Date: Jun 2005
Location: Vientiane, Laos
Posts: 201
Thanks for your input.
Now that my grey-matter is starting to recover after the festive season, I realise that in my case I should invoke PEC since when using my SBIG/AO7 system, no guide commands are sent to the mount unless it is outside the capture range of the AO7. Hence if I can keep the mount reasonably in the right place, the AO7 should sort out the rest without talking to the mount.
BC
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 05:46 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
OzScopes Authorised Dealer
Advertisement
NexDome Observatories
Advertisement
Bintel
Advertisement
Meade Australia
Advertisement
SkyWatcher Australia
Advertisement
Lunatico Astronomical
Advertisement
Celestron Australia
Advertisement
Astronomy and Electronics Centre
Advertisement