#1  
Old 02-08-2019, 12:31 PM
LewisM's Avatar
LewisM
Novichok test rabbit

LewisM is offline
 
Join Date: Aug 2012
Location: Somewhere in the cosmos...
Posts: 9,232
Clean Out Round 2

Continuing to clear out the now-no-longer-required items

As before, shown price INCLUDES postage WITHIN AUSTRALIA.

Numbers correspond to the photos in case the order gets mixed up

1. Optec NEQ-6 tripod head to Vixen GPD/GPDX/GPD2 or Skywatcher HEQ5 equatorial head. Cost new is over $110 Aus. Selling this for $65 SOLD SOLD SOLD

2. Vixen counterweight shaft top nut for GP/GPD/GPDX/GPD2 $15

3. Vixen GPD dovetail head with clamps $20 SOLD SOLD SOLD

4. Vixen DAMAGED SXW head - what you see is what you get. I bought the SXW with this damaged head and replaced with a new head. Good for parts - it still functions but the locking screw snapped (2 pieces) and a small area broke out from the casting. (Photos 4). AS IS $15 SOLD SOLD SOLD

5. Vixen GP/GPD/GPDX/GPD2 (and MAYBE EQ5?) altitude jack screw and azimuth screw set (8mm thread). A little bent on one, some rust (this is why I replaced them with new ones I imported). Az screws plastic is a bit rough and tumble. $15 {on hold}

6. SOLD

7. Vixen 6x30 finder stalk - as-new hammertone green. Hard to find now. $20 SOLD SOLD SOLD

8. Vixen GP/GPD/GPD2 and maybe EQ5 slow mo handles. $10 SOLD SOLD SOLD

Some additional photos pertaining to above items to follow
Attached Thumbnails
Click for full-size image (Optec.jpg)
157.3 KB16 views
Click for full-size image (VixeCWnut.jpg)
68.3 KB7 views
Click for full-size image (VixGPhead.jpg)
76.2 KB14 views
Click for full-size image (SXWhead1.jpg)
92.2 KB14 views
Click for full-size image (GPDjacks.jpg)
105.7 KB9 views
Click for full-size image (GPD az.jpg)
94.0 KB9 views
Click for full-size image (VixFinderStalkGREEN.jpg)
95.8 KB10 views
Click for full-size image (GPDslomo.jpg)
88.3 KB5 views

Last edited by LewisM; 06-08-2019 at 10:27 AM.
  #2  
Old 02-08-2019, 12:32 PM
LewisM's Avatar
LewisM
Novichok test rabbit

LewisM is offline
 
Join Date: Aug 2012
Location: Somewhere in the cosmos...
Posts: 9,232
Detail photos of Optec head adaptor scratch and SXW head damage
Attached Thumbnails
Click for full-size image (optecscratch.jpg)
127.4 KB7 views
Click for full-size image (SXWhead2.jpg)
59.5 KB11 views
  #3  
Old 02-08-2019, 12:35 PM
LewisM's Avatar
LewisM
Novichok test rabbit

LewisM is offline
 
Join Date: Aug 2012
Location: Somewhere in the cosmos...
Posts: 9,232
Continuing:

9. Vixen or others tripod screw - LONG - $10 {SOLD to Poops}

10. Vixen GP/GPD/GPDX/GPD2 worm screw. New, never taken out of wrap ex-Vixen Japan. $20

11. Vixen or others SHORT tripod screw $10 SOLD

12. Vixen/Skywatcher DEC/RA shims $5

13. Vixen 45-60 adaptors - convert the smaller 45mm EQ head spigot to the larger 60mm opening in most HAL130 tripods. 2 of these, never opened $20 EACH - BOTH SOLD

14. Vixen original plastic focuser wheels. $8 per pair (2 pair available - will NOT sell individually). 1 pair remaining

15. Vixen VISAC decal for the front of the spider of the VC-200L. Absolutely new. Cost me an arm and three legs. $10

16. Vixen 60-45 adaptor - converts from the smaller head 45mm hole tripods up to the larger 60mm EQ heads (opposite to 13 above). Not the best condition, but near impossible to buy now. One azimuth bolt position hole is boogered - could be rethreaded to a larger size. With aximuth peg. $20 SOLD DOLD SOL
Attached Thumbnails
Click for full-size image (GPDscrewtri.jpg)
91.9 KB7 views
Click for full-size image (GPDworm.jpg)
100.2 KB9 views
Click for full-size image (GPDtri2.jpg)
95.4 KB10 views
Click for full-size image (GPDtefshim.jpg)
103.3 KB9 views
Click for full-size image (GP4560.jpg)
104.0 KB11 views
Click for full-size image (Vixfocwheels.jpg)
92.8 KB12 views
Click for full-size image (VISAC.jpg)
98.2 KB8 views
Click for full-size image (6045.jpg)
125.9 KB14 views

Last edited by LewisM; 03-08-2019 at 07:21 PM.
  #4  
Old 02-08-2019, 12:35 PM
LewisM's Avatar
LewisM
Novichok test rabbit

LewisM is offline
 
Join Date: Aug 2012
Location: Somewhere in the cosmos...
Posts: 9,232
Last item:

17. Skywatcher NEQ6 tripod leg handbox cradle - free, but pay post (maybe $5?) SOLD SOLD SOLD
Attached Thumbnails
Click for full-size image (HB holder.jpg)
94.3 KB8 views

Last edited by LewisM; 02-08-2019 at 03:00 PM.
  #5  
Old 02-08-2019, 12:36 PM
LewisM's Avatar
LewisM
Novichok test rabbit

LewisM is offline
 
Join Date: Aug 2012
Location: Somewhere in the cosmos...
Posts: 9,232
NOTE: to stop confusion, please send me a PM with the number of item you want - I will then mark them off. Do NOT make any messages here. I will sell this according to time stamp in messages ONLY.
 

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 01:15 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
Meade Australia
Advertisement
NexDome Observatories
Advertisement
Celestron Australia
Advertisement
Bintel
Advertisement
OzScopes Authorised Dealer
Advertisement
Lunatico Astronomical
Advertisement
SkyWatcher Australia
Advertisement
Astronomy and Electronics Centre
Advertisement