Go Back   IceInSpace > General Astronomy > Observational and Visual Astronomy

Reply
 
Thread Tools Rate Thread
  #1  
Old 29-05-2017, 09:21 PM
Foxinsox's Avatar
Foxinsox (Graeme Fox)
Red Giant

Foxinsox is offline
 
Join Date: Aug 2007
Location: Sydney, Australia
Posts: 14
Southern Drift alignment of equatorial mount

Can anyone share please with me their experiences and tips to drift align their equatorial mount . I have an EQ6 mount.
Reply With Quote
  #2  
Old 29-05-2017, 10:47 PM
kens (Ken)
Registered User

kens is offline
 
Join Date: Oct 2014
Location: Melbourne, Australia
Posts: 282
For visual, a drift aligmnent should not really be necessary. Do a 3-star alignment with the handset and check the polar alignment error. If its a long way out, follow the instructions and adjust alt/az bolts then redo the 3-star alignment.
For astrophotography, use the PHD2 drift alignment tool.
With the EQ6, take care with the altitude bolts. Carefully take up the weight of the counterweight bar before adjusting those bolts.
Reply With Quote
  #3  
Old 30-05-2017, 12:40 AM
glend (Glen)
Registered User

glend is offline
 
Join Date: Jun 2013
Posts: 5,215
Or just use Sharpcap 2.9s polar alignment tool. Much quicker than drift alignment, takes just a few minutes, and its free.
Reply With Quote
  #4  
Old 30-05-2017, 01:28 AM
astro744
Registered User

astro744 is offline
 
Join Date: Apr 2007
Posts: 801
See https://www.assa.org.au/resources/eq...lar-alignment/

http://www.minorplanet.info/ObsGuide...rAlignment.htm

(Follow rules for Southern Hemisphere #1 & #2)

Ensure that the base of your EQ head is level. Note the azimuth of the base should be geographic N-S not magnetic so if using a compass allow for the magnetic deviation. The altitude should be set to your latitude with the polar axis pointing to the SCP.

No 'electronics' needed just RA motor engaged at sidereal rate and and illuminated crosshair eyepiece. Align crosshairs so they point N-S/E-W. Easily done by switching off motor drive briefly. If double crosshair centre star in box, if single crosshair defocus star and centre crosshair on it. May need slightly brighter star if using defocused image.

Once you have aligned mark the position of the tripod feet on the ground so that next time it is quicker to do and don't adjust any altitude and azimuth knobs in the meantime as they will be set for your location with only the slightest tweak if needed.
Reply With Quote
  #5  
Old 30-05-2017, 07:58 AM
MattT's Avatar
MattT (Matthew)
Reflecting on Refracting

MattT is offline
 
Join Date: Jul 2011
Location: Melbourne, Australia
Posts: 1,196
One more...http://www.astrotarp.com/drift_method-2.html

I find this one easy to understand and use...trees block the SCP for me.
Reply With Quote
  #6  
Old 30-05-2017, 02:05 PM
croweater (Richard)
Don't Panic!

croweater is offline
 
Join Date: Feb 2015
Location: Millicent, South Australia
Posts: 219
Hi , I use this old tip from "Southern Astronomy" to work out adjustment directions for polar alighnment. Makes it a lot easier to avoid confusion.I had to take photo as my scanner is kaput. Apologies a bit blurry. Cheers Richard.
Attached Thumbnails
Click for full-size image (20170530_132739.jpg)
179.9 KB97 views
Reply With Quote
  #7  
Old 11-06-2017, 10:21 PM
SA_Dolphin_22 (Tony)
Registered User

SA_Dolphin_22 is offline
 
Join Date: Sep 2012
Location: Salisbury Park, SA, Australia
Posts: 13
If you are able to attach a DSLR to the scope then this will work.
It is quick and really easy to complete and the added bonus is accurate as well.
Use a red dot finder to determine the direction of nth and east and the others are straight forward.

As has been previously stated your mount must be level, and pointed in the correct direction to start with. Mag variation will come into account but using the D.A.R.V method will also incorporate this (will mean a lot of azimuth movement to start with). I use a length of wood with a 90 degree line marked and then an 8 degree to the right of this to allow for the Mag Var. I do this when first setting up and it means only a small movement is required most of the time. for level I use the mobile phone with a level app which is easy then to set to your current latitude. All in all as the good Alexander the meerkat states, 'Simples'. .

On the preview I am not seeing my attachment so if it did not appear then use google and look up D.A.R.V, Drift Alignment by Robert Vice.
Reply With Quote
  #8  
Old 12-06-2017, 07:50 AM
Retrograde's Avatar
Retrograde (Pete)
a.k.a. @AstroscapePete

Retrograde is offline
 
Join Date: Oct 2011
Location: Sydney
Posts: 939
There is a pretty decent summary of drift alignment here on the Ice in Space forum: http://www.iceinspace.com.au/63-405-0-0-1-0.html

I'm rather old-school and use an illuminated cross-hair eyepiece to do my drift alignment. I find it takes roughly 30 minutes to get an alignment good enough for long-exposure photography. As can be seen from the above posts there are many ways to achieve a good polar alignment so find one that works for you
Reply With Quote
  #9  
Old 12-06-2017, 11:41 AM
rrussell1962
Registered User

rrussell1962 is offline
 
Join Date: May 2014
Location: Brisbane
Posts: 404
I found this one useful. If you look at what the author refers to as the Collins method you can mess around with the formulae, make some approximations and get an idea as to how much you need to adjust relative to the observed drift. Also has nice representations of which way you adjust relative to the drift for different types of telescopes with and without diagonals.

http://shadycrypt.com/pages/Polar/Polar.htm
Reply With Quote
  #10  
Old 15-06-2017, 10:30 PM
SuperG
Registered User

SuperG is offline
 
Join Date: Oct 2014
Location: Meadowbank, NSW
Posts: 103
I image from cricket pitches in darker areas. This lend itself to a normally horizontal surface. Sorry writing this on my phone.
1. You tripod probably has an N on one if the legs; point this to the south (use your smart phone or compass.
2. Turn you scope so it points directly north and focus your dslr on a star near the horizon.
3. You have a newt. Using an external/ cable cam trigger and also bulb mode press and hold to open the shutter for 10 seconds. This will serve as a start marker. .
4. Move the star in a vertical direction at a slew speed of 2 for 30 seconds. Then immediately reverse the direction for the same amount of time. I count in my head.
5. Release the cam shutter and view the image. It will probably look like a V shape or upside down v.
6. Lift the mount gently and turn a few degrees to the east or west and repeat steps 2-6 till the v shape turns to a single line.
7. The the scope to the east and focus on a star near the horizon. You will need to respeat the process above but the star needs to be moved left or right rather than up or down. For this step adjust the mount latitude angle up or down till the v line becomes a single line.
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 07:04 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
Meade Australia
Advertisement
Lunatico Astronomical
Advertisement
SkyWatcher Australia
Advertisement
Celestron Australia
Advertisement
OzScopes Authorised Dealer
Advertisement
Bintel
Advertisement
NexDome Observatories
Advertisement
Astronomy and Electronics Centre
Advertisement