Go Back   IceInSpace > Equipment > Equipment Discussions

Reply
 
Thread Tools Rating: Thread Rating: 25 votes, 4.84 average.
  #601  
Old 12-10-2020, 03:53 PM
Allan_L's Avatar
Allan_L (Allan)
Member > 10year club

Allan_L is offline
 
Join Date: Mar 2008
Location: Central Coast NSW
Posts: 3,243
That is certainly a good news story!
Not to mention a brilliant piece of equipment.
Reply With Quote
  #602  
Old 17-10-2020, 02:10 PM
Sunfish's Avatar
Sunfish (Ray)
Registered User

Sunfish is offline
 
Join Date: Mar 2018
Location: Wollongong
Posts: 1,363
Thanks Gary. Great piece of equipment and software. Interesting to see the manufacturing here.
Reply With Quote
  #603  
Old 19-11-2020, 09:04 AM
Sconesbie (Scott)
Registered User

Sconesbie is offline
 
Join Date: Dec 2013
Location: Legana, Tasmania
Posts: 273
I received mine yesterday. I am pleasantly surprised at how easy it was to set it up. I got it pretty much done within two hours. Mind you, I took my time. The weird thing is when I checked to see if it was working, the numbers were counting down on the azimuth section when I tilted the altitude (10' collapsible dob) and vice versa. This was until I realised the cables were plugged in the wrong ports. I switched them around and bang, spot on.

I am now waiting on my Bluetooth adapter to arrive so I can sync it with Sky Safari.

I know this topic around Argo has been discussed many times, but now it is my time to share my appreciation for this piece of equipment. I look forward to heading outside and putting it to the test for real as soon as I can.
Reply With Quote
  #604  
Old 19-11-2020, 11:04 PM
gary
Registered User

gary is offline
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,536
Quote:
Originally Posted by Sconesbie View Post
I received mine yesterday. I am pleasantly surprised at how easy it was to set it up. I got it pretty much done within two hours. Mind you, I took my time. The weird thing is when I checked to see if it was working, the numbers were counting down on the azimuth section when I tilted the altitude (10' collapsible dob) and vice versa. This was until I realised the cables were plugged in the wrong ports. I switched them around and bang, spot on.

I am now waiting on my Bluetooth adapter to arrive so I can sync it with Sky Safari.

I know this topic around Argo has been discussed many times, but now it is my time to share my appreciation for this piece of equipment. I look forward to heading outside and putting it to the test for real as soon as I can.
Thanks Scott,

And welcome to the extended family of Argo Navis owners.

Best Regards

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place
Mount Kuring-Gai NSW 2080
Australia
Phone +61-2-9457-9049
sales@wildcard-innovations.com.au
https://www.wildcard-innovations.com.au/
Reply With Quote
  #605  
Old 24-11-2020, 09:46 AM
killer (David)
Registered User

killer is offline
 
Join Date: Dec 2011
Location: Curramore, Qld
Posts: 5
Don't think you will be disappointed. I love mine. I did find that a simple angle meter helped when setting the "fix alt ref" and having the scope sit firm against the base box.
Reply With Quote
  #606  
Old 24-11-2020, 12:21 PM
gary
Registered User

gary is offline
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,536
Tip of the day - Argo Navis Digital Telescope Computer AUTO ADJUST ON

Quote:
Originally Posted by killer View Post
Don't think you will be disappointed. I love mine. I did find that a simple angle meter helped when setting the "fix alt ref" and having the scope sit firm against the base box.
Hi Dave,

Recommend you hang that angle meter back on the garage peg board.
You don't need it.

Instead we recommend you make use of the AUTO ADJUST feature when
you do the FIX ALT REF step.

What it does is takes the roughest of estimates for the altitude reference
point - even if you are tens of degrees out - and refines it based on
your two-star alignment.

To set it up, DIAL up MODE SETUP, SETUP ALT REF and
enter a value of +090.000. Then when you perform the FIX ALT REF
STEP, DIAL up ALT REF=+090.000 AUTO ADJUST ON.

Perform your two star alignment as normal.

The WARP factor should then be 0.00 (A) where the (A) indicates the
ALT REF point was automatically adjusted.

If you see a non-zero WARP factor when AUTO ADJUST is ON or an (X)
instead of an (A), it means something is amiss, such as a misidentified
star or cable not plugged in.

Keep in mind that though a WARP factor of 0.00 is a prerequisite for
good pointing performance, it does not necessarily guarantee good
performance. The reason is that the AUTO ADJUST mechanism bends
over backwards to correct the ALT REF point so as to produce a
WARP factor of zero wherever possible, even if you have misidentified
the alignment stars.

Best Regards

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place
Mount Kuring-Gai NSW 2080
Australia
Phone +61-2-9457-9049
sales@wildcard-innovations.com.au
https://www.wildcard-innovations.com.au
Reply With Quote
  #607  
Old 25-01-2021, 06:26 PM
sn1987a's Avatar
sn1987a (Barry)
Registered User

sn1987a is offline
 
Join Date: Dec 2007
Location: Rockingham WA Australia
Posts: 699
Hi Gary,

I had a RUD when setting up for the great conjunction. The Argo fell out and bounced off the tail lift on my truck then onto a bitumen road. Is it worth sending back to you for a new housing case, some therapy, calibration and TLC?.
Cheers
Barry
Attached Thumbnails
Click for full-size image (ARGO RUD 2.jpg)
196.4 KB17 views
Reply With Quote
  #608  
Old 26-01-2021, 12:19 PM
gary
Registered User

gary is offline
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,536
Quote:
Originally Posted by sn1987a View Post
Hi Gary,

I had a RUD when setting up for the great conjunction. The Argo fell out and bounced off the tail lift on my truck then onto a bitumen road. Is it worth sending back to you for a new housing case, some therapy, calibration and TLC?.
Cheers
Barry
Hi Barry,

We had one unit that was with a member of the US 101st Airborne Division
in Afghanistan that survived a war.

And we've seen a few survive falls from tall ladders.

This one clearly has undergone serious trauma.

Do you happen to know if it still powers on and what is the integrity of
the power jack, encoder port and serial port look like up close?

If the circuit assembly is still operational, the housing can always be
replaced.

Drop me a line at sales@wildcard-innovations.com and I can issue
you with a Return Material Authorization (RMA) number and details
on how to ship it.

Best Regards

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place
Mount Kuring-Gai NSW 2080
Australia
Phone +61-2-9457-9049
sales@wildcard-innovations.com.au
https://www.wildcard-innovations.com.au
Reply With Quote
  #609  
Old 26-01-2021, 12:35 PM
killer (David)
Registered User

killer is offline
 
Join Date: Dec 2011
Location: Curramore, Qld
Posts: 5
Thanks Gary

I had forgotten about that feature Gary!

Quote:
Originally Posted by gary View Post
Hi Dave,

Recommend you hang that angle meter back on the garage peg board.
You don't need it.

Instead we recommend you make use of the AUTO ADJUST feature when
you do the FIX ALT REF step.

What it does is takes the roughest of estimates for the altitude reference
point - even if you are tens of degrees out - and refines it based on
your two-star alignment.

To set it up, DIAL up MODE SETUP, SETUP ALT REF and
enter a value of +090.000. Then when you perform the FIX ALT REF
STEP, DIAL up ALT REF=+090.000 AUTO ADJUST ON.

Perform your two star alignment as normal.

The WARP factor should then be 0.00 (A) where the (A) indicates the
ALT REF point was automatically adjusted.

If you see a non-zero WARP factor when AUTO ADJUST is ON or an (X)
instead of an (A), it means something is amiss, such as a misidentified
star or cable not plugged in.

Keep in mind that though a WARP factor of 0.00 is a prerequisite for
good pointing performance, it does not necessarily guarantee good
performance. The reason is that the AUTO ADJUST mechanism bends
over backwards to correct the ALT REF point so as to produce a
WARP factor of zero wherever possible, even if you have misidentified
the alignment stars.

Best Regards

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place
Mount Kuring-Gai NSW 2080
Australia
Phone +61-2-9457-9049
sales@wildcard-innovations.com.au
https://www.wildcard-innovations.com.au
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 02:04 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Limpet Controller
Advertisement
NexDome Observatories
Advertisement
Bintel
Advertisement
Astronomy and Electronics Centre
Advertisement