ICEINSPACE
Moon Phase
CURRENT MOON
Waning Gibbous 75.3%
|
|
![Old](/vbiis/images/statusicon/post_old.gif)
31-08-2010, 03:50 PM
|
![mental4astro's Avatar](../vbiis/customavatars/avatar5179_6.gif) |
kids+wife+scopes=happyman
|
|
Join Date: Jun 2008
Location: sydney, australia
Posts: 4,979
|
|
ATM DIY sources- non astro
Hi all,
After the blessing from Mojo, I'm starting this new thread as a spin off from one in the Feed Back forum.
After my experience with rebuilding my 17.5" dob, and a couple of other projects, I've come to see that the majority of materials used in a DIY scope project don't come from astro-dealerships. Aluminium, Teflon, plywood, laminates, etc, all need to be gleaned from all sorts of places.
The DIY forum has a number of threads dotted throughout it asking for sources of these materials. I've even done so. Yet the astro-supplies sticky in the equipment forum got me thinking of starting similar thread for DIY stuffs.
So, here goes. Some of the folks who have helped me in my various projects:
Plywood: Lifetime Industries, 56 John St, Leichardt, NSW. www.lifetime.net.au I got my hardwood plywood from them. Good to talk to, and not expensive.
Teflon: The Plastic Centre, Vic., http://www.plasticcenter.com.au/ They posted out the sheet of Teflon to my specs same day. As the stuff is easy to cut and machine, the small sheet proved to be very cheap
A start.
Mental.
|
![Old](/vbiis/images/statusicon/post_old.gif)
31-08-2010, 03:54 PM
|
![asimov's Avatar](../vbiis/customavatars/avatar282_52.gif) |
Planet photographer
|
|
Join Date: May 2005
Location: Bundaberg
Posts: 8,819
|
|
They usually come from my scrap heap at the bottom of the yard for me! I'll use anything that gets me out of trouble.
Thanks Mental
|
![Old](/vbiis/images/statusicon/post_old.gif)
31-08-2010, 04:02 PM
|
![chrisp9au's Avatar](../vbiis/customavatars/avatar1747_7.gif) |
Hitchhiker
|
|
Join Date: Jan 2007
Location: Clifton Springs, Victoria
Posts: 851
|
|
One for regional Victorian star gazers...
Direct Aluminium P/L (03) 5448 5488
4/ 11-13 Maynard Drv, Bendigo VIC 3550
Oh, and Bunnings comes in handy every now and then!
Found some very handy variations of Velcro type fastenings and wraps at Bunnings.
Cheers ![thumbsup](/vbiis/images/smilies/thumbsup.gif)
Chris
Last edited by chrisp9au; 31-08-2010 at 05:10 PM.
Reason: spelling!
|
![Old](/vbiis/images/statusicon/post_old.gif)
31-08-2010, 04:13 PM
|
![kinetic's Avatar](../vbiis/customavatars/avatar5173_49.gif) |
ATMer and Saganist
|
|
Join Date: Jun 2008
Location: Adelaide S.A.
Posts: 2,280
|
|
Great initiative Alex,
A good source of:
Motors, gears, pulleys, toothed belts, machined shafts, clutches,
photo interupter limits switches/PE devices, circlips, chains,bearings,
brass and nylon bushes, one way clutches, solenoids,grub screws,
sprockets...power supplies, Lenses(positive and negative), first surface mirrors,
prisms..................
the list is endless.....
All from old small, medium and large photocopiers and printers,
3 inch and 5 inch disk drives, Hard drives..even the old MFM types...
Check out a few pics in this thread:
http://www.iceinspace.com.au/forum/s...&postcount=149
Steve
|
![Old](/vbiis/images/statusicon/post_old.gif)
31-08-2010, 04:28 PM
|
![hickny's Avatar](../vbiis/customavatars/avatar361_25.gif) |
Registered User
|
|
Join Date: Jul 2005
Location: Sydney, Australia
Posts: 276
|
|
I bought my poles from Capral Industries http://www.capral.com.au/
sites in NSW at
432 West Botany Street ROCKDALE NSW 2216
27 Elizabeth Street WETHERILL PARK NSW 2164 Australia
Got my laminate from a Kitchen Manufacturer locally
|
![Old](/vbiis/images/statusicon/post_old.gif)
31-08-2010, 04:51 PM
|
Registered User
|
|
Join Date: Mar 2006
Location: Geeveston, Tasmania
Posts: 889
|
|
For bearings, belts, sprockets etc. Try Small Parts in Qld.
In NSW, I've used Edcon for aluminium (and steel). Good stock and will cut to size.
For any metalworking tools that your local hardware store doesn't stock, try McJings.
Excellent service and delivery.
A ![thumbsup](/vbiis/images/smilies/thumbsup.gif) for Lifetime Industries for plywood.
|
![Old](/vbiis/images/statusicon/post_old.gif)
31-08-2010, 05:09 PM
|
![chrisp9au's Avatar](../vbiis/customavatars/avatar1747_7.gif) |
Hitchhiker
|
|
Join Date: Jan 2007
Location: Clifton Springs, Victoria
Posts: 851
|
|
I managed to get a sheet of Ebony Star laminate a while back at:
Ballarat Joinery Supplies
20-22 Old Creswick Road, Ballarat, VIC
(03) 5333 3008
http://ballaratjoinerysupplies.com.au
They also have a large selection of laminate offcuts of all types and colours.
They also cut and finished all my kitchen bench tops a couple of years back.
Great to deal with!
Cheers ![thumbsup](/vbiis/images/smilies/thumbsup.gif)
Chris
|
![Old](/vbiis/images/statusicon/post_old.gif)
31-08-2010, 06:02 PM
|
Registered User
|
|
Join Date: Aug 2005
Location: Geelong
Posts: 788
|
|
Gears etc
Gears, Timing Pulleys/ belts and assorted stuff, great range, only place in the world I found a 47 tooth pulley... From The UK, but even with airmail post half the price I could get it from here. Order arrived 5 days after payment....not bad for the distance...and prompt replies to emails...
http://www.hpcgears.com/
Gary
|
![Old](/vbiis/images/statusicon/post_old.gif)
31-08-2010, 09:23 PM
|
![mental4astro's Avatar](../vbiis/customavatars/avatar5179_6.gif) |
kids+wife+scopes=happyman
|
|
Join Date: Jun 2008
Location: sydney, australia
Posts: 4,979
|
|
Snowyskiesau put me onto Carbatec for excellent wood working tools:
http://www.carbatec.com.au/
Thanks Geoff, ![thumbsup](/vbiis/images/smilies/thumbsup.gif) .
Ooohh, I doooo luuuuuv their showroom, ![love1](/vbiis/images/smilies/love01.gif) .
For specialized fasteners, try PSM Fasteners in Marrickville, NSW. Only place I found steel insert nuts. This mob is also supplying the fasteners to the Mt Stromlo rebuild:
http://www.rgafasteners-psm.com/page/contact_us1.html
You might also like to try Maumac for specialised furniture fixtures, including pole inserts:
http://www.maumac.com.au/
|
![Old](/vbiis/images/statusicon/post_old.gif)
31-08-2010, 10:01 PM
|
Registered User
|
|
Join Date: Mar 2006
Location: Canberra
Posts: 430
|
|
Hi Alex
This is an excellent idea. I've used:
- Specialty Fasteners, http://www.specfast.com.au/, Fyshwick ACT - range of screws, bolts, nuts in various metric and imperial sizes
- Blackwoods, http://www2.blackwoods.com.au/Default.aspx, Fyshwick ACT - put me on to Lanolin grease for binocular focusers, etc, source of Loctite UV curing glue for refixing a binocular eyepiece element
- Bunnings and Magnet Mart - anything and everything else (also just picked up one of the waterproof cases)
- and of course right here in the IIS Classifieds.
Andrew
-
|
![Old](/vbiis/images/statusicon/post_old.gif)
01-09-2010, 11:47 AM
|
![ZeroID's Avatar](../vbiis/customavatars/avatar8973_1.gif) |
Lost in Space ....
|
|
Join Date: May 2010
Location: Auckland, NZ
Posts: 4,949
|
|
Quote:
Originally Posted by kinetic
Great initiative Alex,
A good source of:
Motors, gears, pulleys, toothed belts, machined shafts, clutches,
photo interupter limits switches/PE devices, circlips, chains,bearings,
brass and nylon bushes, one way clutches, solenoids,grub screws,
sprockets...power supplies, Lenses(positive and negative), first surface mirrors,
prisms..................
the list is endless.....
All from old small, medium and large photocopiers and printers,
3 inch and 5 inch disk drives, Hard drives..even the old MFM types...
Check out a few pics in this thread:
http://www.iceinspace.com.au/forum/s...&postcount=149
Steve
|
Add to this list from Photocopiers, thick walled aluminium fuser rollers, for focusser tubes, building Crayfords etc. Old IT tape drives are full of miniature bearings, isolation mounts. Try old projectors for lens assemblies, partial transmission windows and optical path elements. ( The projectors get thrown away after the user finds out how much a replacement bulb costs!!)
Copier paper trays often have thin sheet aluminium bases.
Love this thread !! ![thumbsup](/vbiis/images/smilies/thumbsup.gif)
If you checked one of the pics of my 10" build you'd see the pile of engineering bits under the bench in my garage and there is an electrical heap at the other end.
Throw nothing away !!
|
![Old](/vbiis/images/statusicon/post_old.gif)
01-09-2010, 01:19 PM
|
Registered User
|
|
Join Date: Mar 2006
Location: Geeveston, Tasmania
Posts: 889
|
|
If you're after nuts and bolts of any size, then Bolts and Industrial Supplies is worth a look.
If you're like me and don't have your own transport, then a good mail order place for this sort of thing is invaluable.
I've just ordered some 1.6mm metric screws, your local Bunnings DEFINITELY doesn't stock those!
And for the electronic side of ATMs,, check out Sparkfun. Lots of components, microcontrollers, etc. Ocean Controls in Melbourne also have an interesting range of 'stuff' including small stepper motors.
|
![Old](/vbiis/images/statusicon/post_old.gif)
01-09-2010, 07:23 PM
|
![En1gma's Avatar](../vbiis/customavatars/avatar7733_1.gif) |
Registered User
|
|
Join Date: Sep 2009
Location: Sydney, Australia
Posts: 336
|
|
I have nothing much to add "ATM"
But I will mention that if ever find that you need small pieces of wood, Mitre 10 Timber centre at Canterbury, off canterbury Rd, NSW. The chaps there are very helpful in offering offcuts at very cheap prices.
Last I went there for some small pieces of hardwood ply, I picked up a 30cm x ~90cm sheet for 4 bucks... I paid more getting them to cut it for me!.
Cheers
Rob
P.S Alex, great idea on starting this thread.
|
![Old](/vbiis/images/statusicon/post_old.gif)
01-09-2010, 08:46 PM
|
![mental4astro's Avatar](../vbiis/customavatars/avatar5179_6.gif) |
kids+wife+scopes=happyman
|
|
Join Date: Jun 2008
Location: sydney, australia
Posts: 4,979
|
|
Laminate: The 'good book', "The Dobsonian Telescope", mentions the use of 'Ebony Star' by Wilsoncraft & the Quarry Finish range of colours from Laminex.
While Ebony Star is available in Oz, it is not cheap. Quarry Finish range is a discontinued range, now only available as off-cuts or the occassional odd sheet. Another option, though it too is discontinued, is the 'Dimensions' range from Formica. Available as per the Laminex stuff.
Off-cuts of these are usually available from kitchen and cabinet makers. I don't list any in particular as there are so many around the country, never too far from anyone. A good start is either a local newspaper or the Yellow Pages.
The one thing in being discontinued is that the colours available may not be to your particular likeing. My philosophy here is 'you are looking through the scope, not at it. Such is life'.
|
![Old](/vbiis/images/statusicon/post_old.gif)
05-09-2010, 09:08 AM
|
Registered User
|
|
Join Date: May 2009
Location: Brisbane
Posts: 25
|
|
shops in Brisbane
Hi all
I get my stainless steel (and other non-rusting stuff)screws etc. at my local chandlery shop (boat bits). They also have a great selection of springs and thousands of other useful bits and pieces....and there is no minimum number of screws etc to buy.
In Brisbane there is also a place called reverse garbage which has lots of stuff but you have to go there to see what they have perspex/plywood/timber/springs/glass/plastic punchings/sail cloth and ANYTHING else. Local companies give them their clean waste. It is a great place and well worth going to and I'm pretty sure there is one in Melbourne also. I got a 10inch cardboard tube for a 8inch mirror in there. My children still love going in there.
Phill
|
![Old](/vbiis/images/statusicon/post_old.gif)
05-09-2010, 02:50 PM
|
![Moon's Avatar](../vbiis/customavatars/avatar5817_7.gif) |
This sentence is false
|
|
Join Date: Oct 2008
Location: Melbourne
Posts: 1,147
|
|
Some stuff for an observatory in Melbourne.
V-Groove Wheels
Richmond casters
Telescope Pier
Arky Welding
5/30 Cochranes Rd
Moorabbin VIC 3189
(03) 9555 3537
Blasting and Powder Coating
For telescope parts and pier...
A Class Powder Coating
High Quality Fastners
Great range of stainless steel bolts/screws
Cost less bolts
Builder
Get Bob the builder to knock you up a roll off observatory. Tel 0400890916
James
|
![Old](/vbiis/images/statusicon/post_old.gif)
08-09-2010, 07:30 AM
|
![mental4astro's Avatar](../vbiis/customavatars/avatar5179_6.gif) |
kids+wife+scopes=happyman
|
|
Join Date: Jun 2008
Location: sydney, australia
Posts: 4,979
|
|
Quote:
Originally Posted by Phizzy
In Brisbane there is also a place called reverse garbage
Phill
|
There's one in Sydney too, in Marrikville. I got sheets of thin MDF to make several router & circular saw jigs for myself, ![thumbsup](/vbiis/images/smilies/thumbsup.gif) .
I think there's at least another in Melbourne, if not in some other cities.
|
![Old](/vbiis/images/statusicon/post_old.gif)
17-09-2010, 01:26 PM
|
Registered User
|
|
Join Date: Sep 2006
Location: Mount Martha
Posts: 371
|
|
In Victoria , you can get threaded inserts from:
Hills Clearance Centre in Keysborough
Cambria Rd (cnr Bridge Rd) 3173
Ph: (03) 9238 2555
Rod.
|
![Old](/vbiis/images/statusicon/post_old.gif)
18-09-2010, 07:55 PM
|
Registered User
|
|
Join Date: Jul 2008
Location: TINONEE . NSW
Posts: 243
|
|
In N.S.W. At Coffs Harbour:-
www.plasticsfactory.com.au
1mm black styrene.
Comes in 2440mm x 1220mm sheets.
High gloss on one side and semi flat on other side.
Semi flat side can be made dead flat by rubbing with wet and dry paper.
Some people use KLYDEX.
This is better than klydex because it does not go soft on warm days, is self supporting and finish on outside is proffessional looking. High impact material.
Can be cut with a sharp stanley knife or shaped easily and bent around
secondary cages etc.
Excellent for DIY for dobs etc.
I built my 20 inch obsession clone in 2001.
this material has not moved,or cracked or changed at all in that time.
A friend has also built a 16 inch obsession clone as well and very happy with this material.
If anybody wants a sample of this material I can send a piece to you.
Peter Langdown
|
![Old](/vbiis/images/statusicon/post_old.gif)
11-10-2010, 04:30 PM
|
![Benno85's Avatar](../vbiis/customavatars/avatar5707_1.gif) |
Registered User
|
|
Join Date: Oct 2008
Location: Wilton, NSW
Posts: 241
|
|
www.sdp-si.com
Great site in the US wither everything from spur gears, dc motors, bolts, threaded rods. And quite cheap too, less than half of what I would pay for some items if I bought them locally, even better now that the Aussie dollar is up!!
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +10. The time is now 11:38 AM.
|
|