ICEINSPACE
Moon Phase
CURRENT MOON
Waning Gibbous 76.8%
|
|
09-08-2017, 05:03 PM
|
Registered User
|
|
Join Date: Mar 2017
Location: Queenstown, New Zealand
Posts: 95
|
|
Still undecided on 1st scope for AP
I thought I had decided on an 8" f4 newt, then (based on advice from a few people with far more knowledge and experience than I ) I had a rethink and decided to be sensible and get a 6" f4 or f5 (weight of the 8" f4 being too much for the HEQ5 Pro)
Thing is, one of the attractions of a Newt was cheap, but when you add the $339 of a baader MPCC III coma corrector, it doesn't seem quite so cheap anymore.
Maybe I should rethink and go the usual route of an 80ED ?
Option 1
What are your thoughts on this ? an 80ED Triplet f6 480mm FL
670 Euros = approx. $1000 AUD
http://www.teleskop-express.de/shop/...P-Focuser.html
Option 2
A 150/4 from Andrews for $399 - (awaiting new stock) plus $339 for the MPCC III = $738
Option 3
A 150/5 from Andrews at $379 plus MPCC III $339 = $718
Option 4
A 200mm 8" f4 CF newt from Andrews for $599. I've asked what the weight of this is, hopefully the CF will reduce the weight enough to make it viable on the HEQ5 plus the added bonus of extra stiffness of the CF.
Price = $599 + MPCC $339 = $938
Andy
|
09-08-2017, 05:13 PM
|
Registered User
|
|
Join Date: Sep 2012
Location: Helensburgh NSW
Posts: 367
|
|
Hi Andy
just remember with the ed80 from Teleskop Express will attract tax when it enters OZ if it works out over a grand .
have a look at some of Bintels imaging scopes mainly the Newts as they are quit well priced and they have after Pay and good after sales service .
plus the Newts are easy to collimate also depends on what you want to image and what camera you are using
cheers Pete
|
09-08-2017, 05:17 PM
|
Registered User
|
|
Join Date: Jun 2013
Location: Lake Macquarie
Posts: 7,054
|
|
Andy, with that TS80 triplet,which is a very nice, well colour corrected scope, you will need to factor in the purchase of the reducer corrector at some point (which gives you flat field and faster focal length), or you could just buy the flattener without reduction. If you go down to the bottom of that page you linked, you will see the choices of the Photoline 2 or 3" reducer correctors or just the TS Flat flattener. So budget for that. Or image at the native focal length to start out.
The post below is correct, if your total cost, including shipping, reaches $1000 Aud you will need to pay GST, which is collected inbound. So given the present exchange rate and shipping you will get hit with inbound charges.
There is a way you can get it under the $1k threshold.
Have a look at this TS80 FPL-53 Doublet APO:
https://www.teleskop-express.de/shop...n-focuser.html
It is a little cheaper than the triplet but still very capable for imaging. Native f7 it reduces to f5.5 with the reducer corrector. It is also a little lighter than the triplet version. Importantly you can get it shipped to you here for less than $1k, that is delivered, so no inbound charges (GST). Make sure you specify DHL delivery in the shipping options as that is much cheaper than UPS and keeps you under the threshold.
Once you get the scope, you can order the reducer corrector of your choice, and bring it in on a new order, it will be under the GST threshold of course. Don't bundle the orders.
Which ever way you go, i recommend the 3" Photoline Reducer Corrector, its very good, i have it. You could save abit with the 2" version if needed but it won't suit the larger APOs in that family of scopes.
Of your other options, i believe Option 3 is preferable. It is abit easier to collimate an f5 and it has less native coma, you could see if you can buy a second hand Baader MPCC, they do come up now and then on the classifieds.
Don't worry about Carbon Fibre at that size.
I should tell you that i just bought a TS80 FPL-53 Doublet APO and it arrived under $1000. I already had the reducer corrector because i own its bigger brother as well. Those TS FPL-53 APOs are excellent value and have very good rack and pinon focusers. Good luck
Last edited by glend; 09-08-2017 at 05:43 PM.
|
09-08-2017, 05:20 PM
|
|
Local Korean Millennial
|
|
Join Date: Dec 2009
Location: Charleville
Posts: 2,063
|
|
There were a couple of things i didnt like about the GSO CF newt (apart from the wrong mirror being installed), its that collimation was an absolute hell. Not just because it was an f4 but the collimation screws themselves are like butter, they'll strip clean if you're not careful. If you are intending to get it, I'd suggest either install bobs knob (or equivalent) or replace the philips screws with more sturdy ones.
|
09-08-2017, 05:46 PM
|
|
Local Korean Millennial
|
|
Join Date: Dec 2009
Location: Charleville
Posts: 2,063
|
|
Quote:
Originally Posted by glend
Have a look at this TS80 FPL-53 Doublet APO:
https://www.teleskop-express.de/shop...n-focuser.html
It is a little cheaper than the triplet but still very capable for imaging. Native f7 it reduces to f5.5 with the reducer corrector. It is also a little lighter than the triplet version. Importantly you can get it shipped to you here for less than $1k, that is delivered, so no inbound charges (GST). Make sure you specify DHL delivery in the shipping options as that is much cheaper than UPS and keeps you under the threshold.
Once you get the scope, you can order the reducer corrector of your choice, and bring it in on a new order, it will be under the GST threshold of course. Don't bundle the orders.
Which ever way you go, i recommend the 3" Photoline Reducer Corrector, its very good, i have it. You could save abit with the 2" version if needed but it won't suit the larger APOs in that family of scopes.
Of your other options, i believe Option 3 is preferable. It is abit easier to collimate an f5 and it has less native coma, you could see if you can buy a second hand Baader MPCC, they do come up now and then on the classifieds.
Don't worry about Carbon Fibre at that size.
I should tell you that i just bought a TS80 FPL-53 Doublet APO and it arrived under $1000. I already had the reducer corrector because i own its bigger brother as well. Those TS FPL-53 APOs are excellent value and have very good rack and pinon focusers. Good luck
|
Is there a difference between the TS and a Skywatcher ED80? From what I remember, both have FPL-53 lenses in them with about the same f ratio. You could get them super cheap used in great conditions and they pop up occasionally here in classified. You can get a made-for-ed80 reducer corrector for it for about $300 new.
|
09-08-2017, 06:14 PM
|
|
Drifting from the pole
|
|
Join Date: Feb 2013
Location: Brisbane
Posts: 5,429
|
|
The Skywatcher ED80 is a doublet and slower focal ratio at f/7.5
IMO the night is too short for long focal ratio scopes so I'd want a reducer on that too, but they're relatively inexpensive for an ED80.
|
09-08-2017, 06:37 PM
|
|
Registered User
|
|
Join Date: Nov 2012
Location: Mackay
Posts: 1,657
|
|
Andrews have the mpcc3 for $299, but its a bit cheaper again from os. I got mine from firstlight optics UK for $265 and that was including $50 for standard shipping and it arrived in 7 days to my door in Mackay.
|
09-08-2017, 06:51 PM
|
Registered User
|
|
Join Date: Jun 2013
Location: Lake Macquarie
Posts: 7,054
|
|
Quote:
Originally Posted by that_guy
Is there a difference between the TS and a Skywatcher ED80? From what I remember, both have FPL-53 lenses in them with about the same f ratio. You could get them super cheap used in great conditions and they pop up occasionally here in classified. You can get a made-for-ed80 reducer corrector for it for about $300 new.
|
Yes there is a difference between the TS80 Doublet and the Skywatcher ED80. With the Skywatcher you would need the ED80 Pro version ( which has the dual speed Crayford style focuser) and is more expensive, and it is still f7.5. As Dunk has pointed out you would need to find a reducer corrector that worked with it, the one most often sighted is the 0,85 reducer corrector ( so it would go to f6.35. I agree they are cheap as used scopes but the objective in those older ones would need verifying. Imho the build quality of the TS80 and the solid imaging rack and pinion focuser is much better than the Skywatcher offering.
|
09-08-2017, 07:00 PM
|
Registered User
|
|
Join Date: Jun 2013
Location: Lake Macquarie
Posts: 7,054
|
|
Quote:
Originally Posted by doppler
Andrews have the mpcc3 for $299, but its a bit cheaper again from os. I got mine from firstlight optics UK for $265 and that was including $50 for standard shipping and it arrived in 7 days to my door in Mackay.
|
The Baader MPCC MkIII is $205 Aud from Teleskop-Express (187 euro), you need to allow 36 euro, or $53 Aud for DHL shipping, so $285 Aud delivered (no GST, etc). In this case Andrews might be a better choice. There are other coma correctors as well but the Baader is highly regarded and suits DSLR standard sensor spacing.
|
11-08-2017, 02:15 PM
|
Registered User
|
|
Join Date: Mar 2017
Location: Queenstown, New Zealand
Posts: 95
|
|
Quote:
Originally Posted by cadman342001
Option 4
A 200mm 8" f4 CF newt from Andrews for $599. I've asked what the weight of this is, hopefully the CF will reduce the weight enough to make it viable on the HEQ5 plus the added bonus of extra stiffness of the CF.
Price = $599 + MPCC $339 = $938
Andy
|
FYI this is the response I got from Luke at Andrews.com
"The weight of the OTA is approximately 8kg (this was using my simple set of scales at home which may not be totally accurate, but it would be close to this weight).
However, you should be aware that we only have one of these OTAs in stock and it seems as though either the tube length is wrong or the mirror cell is incorrectly located.
We discovered this when we sold the second last piece from our stock to a customer who reported that he was unable to reach focus with his camera.
We offered this customer a partial refund, which he accepted and kept the OTA.
Unfortunately, the last piece of this model we have in stock has the same problem, so you would not be able to focus a camera with this telescope at prime focus (our website will be updated to reflect this issue soon)."
|
11-08-2017, 02:27 PM
|
|
Local Korean Millennial
|
|
Join Date: Dec 2009
Location: Charleville
Posts: 2,063
|
|
Quote:
Originally Posted by cadman342001
FYI this is the response I got from Luke at Andrews.com
"The weight of the OTA is approximately 8kg (this was using my simple set of scales at home which may not be totally accurate, but it would be close to this weight).
However, you should be aware that we only have one of these OTAs in stock and it seems as though either the tube length is wrong or the mirror cell is incorrectly located.
We discovered this when we sold the second last piece from our stock to a customer who reported that he was unable to reach focus with his camera.
We offered this customer a partial refund, which he accepted and kept the OTA.
Unfortunately, the last piece of this model we have in stock has the same problem, so you would not be able to focus a camera with this telescope at prime focus (our website will be updated to reflect this issue soon)."
|
oh snap, didnt know it was a recurring problem, i thought i was the only one affected by the mismanufacturing.
|
11-08-2017, 02:59 PM
|
|
PI cult recruiter
|
|
Join Date: Apr 2010
Location: Brisbane
Posts: 10,584
|
|
Quote:
Originally Posted by glend
if your total cost, including shipping, reaches $1000 Aud you will need to pay GST, which is collected inbound.
|
Minor correction: if the cost *excluding* shipping is $1,000 or more then you have to pay GST. The GST is calculated on the cost *including* shipping.
|
12-08-2017, 12:40 PM
|
|
ze frogginator
|
|
Join Date: Oct 2007
Location: Sydney
Posts: 22,062
|
|
ED80 all the way. As a start up you'll never get better fun than a small refractor. Spend your money on a good mount and a decent camera. I wouldn't spend $1k on a refractor either. You can pick up a nice one second hand for a lot less money.
From there on you can play with guiding and imaging without having to worry about collimation or portability.
First ED80 I got for AUD265.00 and I kept it for 5 years. Loved that scope. Took it every where.
|
12-08-2017, 08:14 PM
|
Registered User
|
|
Join Date: Jul 2008
Location: Killara, Sydney
Posts: 4,147
|
|
That would be an excellent choice.
|
12-08-2017, 11:36 PM
|
|
Registered User
|
|
Join Date: Aug 2015
Location: Brisbane, Australia
Posts: 162
|
|
The cheaper one has fpl 51 glass and a 2" crayford focuser, the more expensive has fpl53 and 2.5" r&p focuser and seems to be overall better scope. If it were me I'd pay the bit more for a decent bit more quality.
|
13-08-2017, 05:15 AM
|
Registered User
|
|
Join Date: Jun 2013
Location: Lake Macquarie
Posts: 7,054
|
|
Andy, Teleskop-Express offers a large, sometimes confusing, range of scopes. In the 80mm objective category i would suggest sticking with the Photoline APO, FPL-53 version, it is a good buy and deliveres to you for less than $1000. The focuser is the same strong 2.5" dual speed R&P unit used on the TS115 Photoline APO. They are well built scopes, and each one is checked by their techs, including collimation, before shipping.
Last edited by glend; 13-08-2017 at 05:33 AM.
|
13-08-2017, 05:47 AM
|
Registered User
|
|
Join Date: Jun 2013
Location: Lake Macquarie
Posts: 7,054
|
|
Quote:
Originally Posted by RickS
Minor correction: if the cost *excluding* shipping is $1,000 or more then you have to pay GST. The GST is calculated on the cost *including* shipping.
|
Rick, the cost of the TS Photoline 80MM APO, with FPL-53 and 2,5" R&P focuser ( model TSAPO80f7) is presently 558 euros, or $835 Aud, shipping to Australia via DHL is 36 euros, or $54 Aud, hence total cost of getting it to your door is $943 Aud. So no GST is applied, and that is the combined total price. If the buyer opts for the slightly faster UPS shipment at 105 euros, the total cost would just trip over the $1000 threshold. I have used DHL without issue, and it provides tracking.
TS triple box these scopes, there is an outer shipping box and inside that, buried in foam beads, is the inner two boxes. The inner most box has a one piece EVA foam liner cutout to fit the scope exactly, with a lid. The EVA foam liner is the same liner used in the TS hardcases.
Last edited by glend; 13-08-2017 at 06:02 AM.
|
17-08-2017, 09:05 PM
|
|
Registered User
|
|
Join Date: Aug 2009
Location: perth w.a.
Posts: 2,275
|
|
andy if you do go down the 80mm triplet route i have the TS photoline 0.79 2" FF / FR just sitting at home here most suitable for (TS) triplets
i changed my APM 107 to the 3" version last year
pat
|
18-08-2017, 12:00 PM
|
|
Drifting from the pole
|
|
Join Date: Feb 2013
Location: Brisbane
Posts: 5,429
|
|
I'd say if it will be primarily for imaging, don't run the risk of lack of colour correction with a doublet, as it will be more objectionable to a sensor than it is to the eye.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +10. The time is now 07:32 AM.
|
|