ICEINSPACE
Moon Phase
CURRENT MOON
Waning Gibbous 77%
|
|
04-05-2017, 01:48 PM
|
Registered User
|
|
Join Date: Jun 2013
Location: Lake Macquarie
Posts: 7,054
|
|
ALDI 3D Printer for $499
Just received the latest ALDI Special Buys flyer, and noticed they are offering 3D Printers for $499 on the 13th of May. All the PLA strand colours are offered as well on 1kg spools ($35).
The printer seems constrainted by base plate size (200×200mm), but the base is heated to ensure flat base layer. As i don't know much about them i can't comment further. Maybe orhers can.
|
04-05-2017, 03:19 PM
|
Registered User
|
|
Join Date: Aug 2005
Location: Geelong
Posts: 788
|
|
Glen,
it is a rebranded version of the Wanhao Duplicator I3 Plus.
Review here:
https://www.youtube.com/watch?v=qoEApsA7pAk
I have the older cheaper model Wanahao I3 that Aldi rebranded as a Cocoon Create, and Kogan rebranded as a Balco. Review here:
https://www.youtube.com/watch?v=Bd5EvrnQC5Q
Have had a lot of fun, and printed some fun telescope stuff. Good value for money.
Would happily buy this printer.
cheers
Gary
|
04-05-2017, 03:47 PM
|
|
amateur
|
|
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 6,943
|
|
Yes, $500 is pretty good price: I build 3D printer myself (~175mm cube) and spend ~$250 for parts & materials... and lot of time - but I don't regret it, it was a great fun (still is..).
200mm is OK.. if you need anything larger, you can always print it in couple of bits.
|
05-05-2017, 01:00 PM
|
Make it so! - Capt.Picard
|
|
Join Date: Jan 2012
Location: Melbourne
Posts: 1,982
|
|
Very good price!
No need to think about this purchase at all.
I already have 2 3D Printers so don't need this one.
For those who are curious and are starting out it's worth it!
|
05-05-2017, 06:00 PM
|
|
Registered User
|
|
Join Date: Jan 2005
Posts: 2,943
|
|
Seriously considering it but last timr these came out they were sold out same day. Is there something better with an enclosure for ABS work? Also with enclosure woud be safer from kids messing with it or getting burned by the hot plate
|
05-05-2017, 06:03 PM
|
Make it so! - Capt.Picard
|
|
Join Date: Jan 2012
Location: Melbourne
Posts: 1,982
|
|
Quote:
Originally Posted by netwolf
Seriously considering it but last timr these came out they were sold out same day. Is there something better with an enclosure for ABS work? Also with enclosure woud be safer from kids messing with it or getting burned by the hot plate
|
Maybe not enclosed for ABS at the price point. My Up Mini cost $900 which is a fully enclosed system and after about $200 worth of upgrades it's a great little printer.
I also have a CTC printer which you can pickup on eBay for around $500 which is fantastic value. Again you will need to pump a few hundred bucks into it for an enclosure and some upgrades.
|
05-05-2017, 08:44 PM
|
|
Registered User
|
|
Join Date: Jan 2005
Posts: 2,943
|
|
Thx Stefan was also looking at the Creality Cr-10 which for 500usd gives quiet a large print area. Again enclosure would be a challenge. In your experience can you still print ABS without an enclosure? Will look at the CTC.
Maybe a diy would work out cheaper fot enclosed unit. Are there other filiment types that are as durable as ABS without the need for enclosed space? I am thinking for teledcope parts you dont want them to brittle or to melt with exposure to sun.
|
05-05-2017, 09:16 PM
|
Make it so! - Capt.Picard
|
|
Join Date: Jan 2012
Location: Melbourne
Posts: 1,982
|
|
Quote:
Originally Posted by netwolf
Thx Stefan was also looking at the Creality Cr-10 which for 500usd gives quiet a large print area. Again enclosure would be a challenge. In your experience can you still print ABS without an enclosure? Will look at the CTC.
Maybe a diy would work out cheaper fot enclosed unit. Are there other filiment types that are as durable as ABS without the need for enclosed space? I am thinking for teledcope parts you dont want them to brittle or to melt with exposure to sun.
|
You defs need an enclosure if you want to have successful prints with ABS and a very hot heat bed. I personally haven't tried ABS with an open printer as it's never recommended.
I have some TPU which is meant to be flexible but strong as well which I need to experiment with but I mainly print with ABS due to having issues with PLA jamming my nozzle (with the Up Mini).
I am conducting a test print now with some PLA with the CTC which isn't enclosed and so far it looks ok.
If you do end up buying an open source printer I highly recommend purchasing Simplify3D. The best slicing software you can buy and you can change so many settings of the printer and prints. A bit pricey at $200 but it is so worth it!
|
05-05-2017, 09:40 PM
|
|
amateur
|
|
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 6,943
|
|
ABS and open printer are quite OK.
Bed has to be set at 100°C, nozzle at 220°C, and if part is small, fan cooling is necessary.
|
06-05-2017, 01:20 AM
|
|
Unregistered User
|
|
Join Date: Apr 2007
Location: Perth, Australia
Posts: 1,164
|
|
Quote:
Originally Posted by netwolf
Are there other filiment types that are as durable as ABS without the need for enclosed space? I am thinking for teledcope parts you dont want them to brittle or to melt with exposure to sun.
|
ABS is actually not UV proof and will degrade in direct sunlight. Special additives can give it UV protection but, as far as I know, the standard printer filaments do not have them.
You may be able to coat the parts with something that is UV proof, not sure.
|
06-05-2017, 01:40 AM
|
|
Registered User
|
|
Join Date: Jan 2005
Posts: 2,943
|
|
Any recommendations on easy to do DIY enclosure kits or else cheap prebuilt enclosed units. Is simplify3d a CAD also or just for slicing? I wish I still worked for Autodesk Fusion looks like a good CAD option for 3D printing.
|
06-05-2017, 01:23 PM
|
|
Unregistered User
|
|
Join Date: Apr 2007
Location: Perth, Australia
Posts: 1,164
|
|
Simplify3D is just for slicing. Not sure about your other questions.
|
06-05-2017, 01:37 PM
|
Registered User
|
|
Join Date: Jun 2013
Location: Lake Macquarie
Posts: 7,054
|
|
What sort of astro gear is suitable for 3D printing? I could see maybe guide scope or finder lens or EP caps, but what else is it suitable for?
|
06-05-2017, 02:25 PM
|
Make it so! - Capt.Picard
|
|
Join Date: Jan 2012
Location: Melbourne
Posts: 1,982
|
|
Quote:
Originally Posted by netwolf
Any recommendations on easy to do DIY enclosure kits or else cheap prebuilt enclosed units. Is simplify3d a CAD also or just for slicing? I wish I still worked for Autodesk Fusion looks like a good CAD option for 3D printing.
|
I use Fusion. Free and powerful enough for what I need to create.
|
06-05-2017, 07:36 PM
|
Registered User
|
|
Join Date: Feb 2017
Location: Latrobe Valley, Australia
Posts: 24
|
|
Quote:
Originally Posted by glend
What sort of astro gear is suitable for 3D printing? I could see maybe guide scope or finder lens or EP caps, but what else is it suitable for?
|
I havent got a clue about 3d printers or telescopes but I was wondering if 3d printing any of the following might be possible ?
Could you print the parts to make a simple red dot finder ? Or even more primitive "gunsights"
The one I just bought is simply a plastic skeleton with a cavity to sit the laser in and it gets pushed around by two screws
Although on the other hand it only cost $10 on ebay
http://www.ebay.com.au/itm/Red-Dot-F...-/282263237841
Racks and Gears for a focussing system ?
Can you 3d print a matching wormscrew and gear ? Or somehow use a rack and gear to make a telescope follow a star ?
|
06-05-2017, 07:59 PM
|
Registered User
|
|
Join Date: Jan 2006
Location: Melbourne
Posts: 30
|
|
I made a camera mount for my GoPro that sits in my focuser. Works a treat.
|
07-05-2017, 10:31 AM
|
|
Astro Noob
|
|
Join Date: Dec 2011
Location: Sydney
Posts: 1,982
|
|
Quote:
Originally Posted by AussieBill
Racks and Gears for a focussing system ?
Can you 3d print a matching wormscrew and gear ? Or somehow use a rack and gear to make a telescope follow a star ?
|
Yes but I'm not sure you'd get the accuracy you're after. Have a look on Thingiverse, there's heaps of gears and worms etc.
I test printed a couple of gears from Thingiverse and a couple I generated myself using geargenerator.com - they seemed to be good enough to make a barndoor tracker, which is what I was planning but never got any further than testing.
Also, I'm not sure why a PLA printer needs a heated floor? I thought that was just for ABS?
|
07-05-2017, 10:55 AM
|
|
Registered User
|
|
Join Date: Oct 2005
Location: Junortoun Vic
Posts: 8,907
|
|
There are guys in Europe working with 3D printers to build spectrograph housings!
Could be an interesting solution.....
|
07-05-2017, 05:18 PM
|
|
amateur
|
|
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 6,943
|
|
Quote:
Originally Posted by luka
ABS is actually not UV proof and will degrade in direct sunlight. Special additives can give it UV protection but, as far as I know, the standard printer filaments do not have them.
You may be able to coat the parts with something that is UV proof, not sure.
|
You can always spry it with paint....
|
07-05-2017, 05:21 PM
|
|
amateur
|
|
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 6,943
|
|
Quote:
Originally Posted by glend
What sort of astro gear is suitable for 3D printing? I could see maybe guide scope or finder lens or EP caps, but what else is it suitable for?
|
Anything that doesn't require precision below 0.2mm.
http://www.iceinspace.com.au/forum/s...ht=life+easier
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +10. The time is now 07:07 AM.
|
|