Go Back   IceInSpace > IceTrade Classifieds > IceTrade Archives

 
 
Thread Tools Rate Thread
  #1  
Old 21-05-2019, 02:53 PM
The_Guru (Ian)
Registered User

The_Guru is offline
 
Join Date: Jan 2015
Location: Near Gympie Qld
Posts: 5
Complete Package

Complete observatory and telescope package.

Observatory:
Base
Hardwood joists, bearers and floorboards
(From the Howard sawmill near Maryborough Qld)
Treated pine stud walls.
Internal walls villaboard. External walls corrugated zincalume.

Geodesic dome
zincalume, aluminium and wood.

Dimensions of Observatory
External 3.1m x 3.1m x 3.8m
Internal 2.8m x 2.8m floor, Ring diameter 2.5m, Dome height 3.0m, Dome opening 1.0m
It is very spacious. Easily fits table, chair, gear and me.

Equipment
Skywatcher 180 mm Maksutov
Skywatcher 80 mm f/5 SW 80
Skywatcher NEQ6 Pro
Various eyepieces: Baader Hyperions, guide and ProStar
ProStar - LP-GUIDE Auto-Guiding Camera Colour
Vixen 2.4 x nosepiece
Vixen X-Y side by side guide mount
Crayford focuser
All other equipment including filters, diagonal, table, chair and what ever I can throw in.
3 pairs of binoculars
All astronomy books, magazines etc

All equipment is in excellent condition, is only a few years old at most and has had little use.

The observatory was wired by a licensed electrician and only needs an extension cord run to an external socket for power. It takes about ten minutes to plug in and get going.

The Observatory is transportable as 2 pieces: dome and base. It can be transported on a long tray HR crane truck. These are about $110 / hour. It would take 1 hour (at most) to load for a good operator.


Cheers

Ian
Attached Thumbnails
Click for full-size image (Picture 01 - Observatory.jpg)
61.9 KB641 views
Click for full-size image (Picture 02 - Mount.jpg)
24.9 KB447 views
Click for full-size image (Picture 03 - Mak Lense.jpg)
51.6 KB448 views
Click for full-size image (Picture 04 - Cover.jpg)
22.6 KB401 views
Click for full-size image (Picture 05 - Socket.jpg)
54.2 KB400 views
Click for full-size image (Picture 06 - Build.jpg)
43.2 KB431 views
Click for full-size image (Picture 07 - Basic set up.jpg)
17.7 KB506 views
Click for full-size image (Picture 08 - Some accessories.jpg)
43.6 KB407 views

Last edited by The_Guru; 04-07-2019 at 11:13 AM. Reason: WIthdrawn from sale
  #2  
Old 10-06-2019, 03:51 PM
The_Guru (Ian)
Registered User

The_Guru is offline
 
Join Date: Jan 2015
Location: Near Gympie Qld
Posts: 5
Price Reduction

Bump for a price reduction.
Cheers
Ian
  #3  
Old 18-06-2019, 08:11 AM
The_Guru (Ian)
Registered User

The_Guru is offline
 
Join Date: Jan 2015
Location: Near Gympie Qld
Posts: 5
EOFY Sale

Final price reduction.
Cheers
Ian
 

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 09:53 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
OzScopes Authorised Dealer
Advertisement
Lunatico Astronomical
Advertisement
NexDome Observatories
Advertisement
SkyWatcher Australia
Advertisement
Celestron Australia
Advertisement
Bintel
Advertisement
Meade Australia
Advertisement
Astronomy and Electronics Centre
Advertisement