[TRADED/FOUND] 7"-15" D style dovetail to suit William Optics rings

[Garbz (Chris)]

Hi All,

I'm interested in a D style dovetail between 7" and 15" which would suit the mounting holes of the William Optics tube rings holding an ED80.

Holes in the WO tuberings are 38mm and 60mm apart + one in the centre so any dovetail with that spacing would suit.

Happy to pay close to the full price as all I'm trying to avoid is paying shipping charges from ADM which amount to half the value of the dovetail.

[citivolus (Ric)]

I might have something Chris. Can you post a picture of the hole configuration? I have a few spare D style mounting plates floating around here.

[Dennis]

Point your browser to this WO webpage

https://www.williamoptics.com/access...Plate_spec.php

Then, <click> the “Dovetail Plate specs” link which should open the following PDF giving the dimensions of the WO Dovetail Plate.

Or...

Warning: Link below opens PDF file.
https://www.williamoptics.com/access...s/BA5-A006.PDF


Cheers

Dennis

[Garbz (Chris)]

Oh woopse. Sorry guys I forgot to close this wanted advert. Ended up getting the losmandy plate to suit from Bintel. Their shipping made it a bit cheaper than getting it from the USA.

Thanks for looking though.