[SOLD] Kendrick Dual Channel Controller + dew heaters.

[mbaddah (Mo)]

For sale is my kendrick dual channel controller and 2x 1.25" firefly dew heaters. Purchased from Bintel here:

http://www.bintel.com.au/Accessories...oductview.aspx

http://www.bintel.com.au/Accessories...oductview.aspx

I will sell as a package or seperately.

$75 for dew controller (include cigarette power plug).
$15 for each firefly dew heater (or $25 for both). One of the straps is slightly torn on the dew heater, but still works perfectly fine.

Or $100 for the package. I will include a cable extension for the dew controller if purchased as a package.

Pick up from Sydney or will ship at buyers expense. Thanks

[blink138 (Pat)]

hello mohammed i am interested
will all of this go on a c11?
pat

[mbaddah (Mo)]

Sale pending.

[blink138 (Pat)]

hello mohammed to whom is sale pending?
pat

[KG8]

Pat if you want to buy here you have to be quick. PM sent means someone has made an offer or more likely bought it. By the time your question is answered the item is probably sold. BTW, those will fit any scope, they are ep heaters. If you have a C11 you probably want a large ring for heating the corrector plate first. And a dew shield to go with it. You can make both yourself.

You can make your own heaters a number of ways and you can certainly make a better variable power controler than the ones premade if your handy with a soldering iron. A 12 volt speed controler kit can be had for $20, the type they use in remote control cars. That will allow you to turn the heat up or down and save battery power. I use a C11 and the mount draws about 1.5 amps but the heaters for the ota, guide scope hand controller and ep can draw up to 3.
Do some research online is the best bet mate.

[mbaddah (Mo)]

Sold.