[WITHDRAWN] Light Boxes - Page 12

Exfso (Peter) · #**221** 07-03-2013, 01:59 AM

No worries Jonathan, very glad you are happy with the light box.

Exfso (Peter) · #**222** 11-04-2013, 02:12 PM

Just for information, I am back in production with these now for anyone interested, the damn shoulder op slowed me down big time

Exfso (Peter) · #**223** 12-06-2013, 08:06 PM

Just bumping this up as I am still doing these, even in this horrible winter weather

Jon (Jonathan) · #**224** 12-06-2013, 08:20 PM

I'd be lost without mine. I've figured out that since I got one of Peter's light boxes three months ago, I've used it for about 1100 flat frames. And increasing exponentially - I'm grabbing about 40-50 a night now.

Sarge (Rod) · #**225** 17-06-2013, 03:12 PM

Mine arrived today - thanks Peter.

Ordered and delivered within two weeks. First class quality and finish. Fits my ED127 like a glove.

Of course the weather gods didn't like it - showers and cloudy

Clear skies

Rod

Exfso (Peter) · #**226** 20-06-2013, 11:28 AM

I am glad you are happy with the box. This time of year is not real flash for imaging, especially in the southern lattitudes.

Cheers

Chris85 (Chris) · #**227** 01-07-2013, 11:25 PM

Hi Peter,

Can you please do me a quote for a GSO Rc 6" with postage to Perth?

Cheers,
Chris

Exfso (Peter) · #**228** 03-07-2013, 01:33 AM

PM sent Chris..

Exfso (Peter) · #**229** 04-07-2013, 02:33 PM

Chris, did you get the PM I sent you??

Chris85 (Chris) · #**230** 04-07-2013, 04:49 PM

Hi Peter, I did get it but I haven't got around to taking the measurements yet. I was planning on doing it this weekend. Cheers

rogerco (Roger) · #**231** 04-07-2013, 05:07 PM

Light box for 8" SCT arrived today

, well packed and all intact. Just as well you sent the tracking number as they didn't leave a card ! but no problem it was at the post office.

Very nicely made, fits beautifully without need to cut out for top and bottom bars. With the telescope pointing straight up it sits nicely around the rim and the ends of the bars stop it from sliding down.

Very pleased with it, well worth getting you to make it, far better job than I could have done. Just need to put a little tab handle on it so I can handle it easily as I only have one hand.

Thanks

Roger

Exfso (Peter) · #**232** 04-07-2013, 11:21 PM

Good Stuff Roger. Damn Aust Post they really are a pain at times. You should have told me, I could probably have constructed some sort of handle for you.

rogerco (Roger) · #**233** 05-07-2013, 01:22 PM

Didn't think about it until I had it in hand, not to worry, small tab of duct tap has it fixed.

Exfso (Peter) · #**234** 02-08-2013, 12:58 AM

Just bumping up to the top again...

Exfso (Peter) · #**235** 31-08-2013, 12:00 AM

All gone quiet for a while, still making these for those that are interested.

Exfso (Peter) · #**236** 19-09-2013, 11:07 PM

Reckon it is time to bump this one up before it gets lost....

WingnutR32 (Sam) · #**237** 27-09-2013, 09:06 AM

I am going to remember to measure the outside diameter of my WO FLT98 over the weekend, Peter.

I've been using your 8" SCT light box for too long on a camera tripod to steady it, would much prefer to just plonk it onto the scope itself, since I have tripped on that tripod too many times.

Exfso (Peter) · #**238** 27-09-2013, 02:12 PM

Now that must have been interesting using a 8" light box to fit a 4" scope, I bet it was flopping around all over the place. My email address: exfso2@adam.com.au
saves clogging up the IIS mail system.

Cheers
Peter

rogerco (Roger) · #**239** 03-10-2013, 06:12 PM

Lightbox for ED80 arrived safe and sound, as usual, nice job, great value for money. Thanks.

Roger

Exfso (Peter) · #**240** 04-10-2013, 05:42 PM

My Pleasure Roger