[NOT REQUIRED] adaptors for vixen focal reducer for VC200L

[graham.hobart (Graham stevens)]

I bought a second hand Vixen focal reducer for the VC200L but it doesn't have the adaptor with it and they don't sell them anymore without buying a whole new FR-(270$).
I just need the bit that the focal reducer screws into that screws into the vixen draw tube. Then the other adaptor should fit on the back of this camera side?
\Graz

[Dennis]

Graham

I used to have a VC200L (late 1990’s) and the Vixen F6.4 Reducer (original model).

One end (telescope side) of the F6.4 Reducer simply screwed into the 60mm thread of the VC200L drawtube and I then used a Vixen 60mm Wide Adapter on the other (camera) end which offered a T-Ring for my Pentax 35mm SLR.

My Astro Shop has these on their website.

Vixen Wide Photo Adaptor 60mm - General Type ($62)

Vixen Wide Photo Adaptor 60mm - Canon EOS ($69.95)

Is it one of these that you are looking for?

Cheers

Dennis

[graham.hobart (Graham stevens)]

No mate, the original fittings for reducer compose of a circular ring and then another bit which attaches the reducer to the drawtube- this is the bit that is missing as without it the FR lens is too small to screw in
http://www.myastroshop.com.au/produc...sp?id=MAS-016F

see the wider portion? that is what I need- it is basically two different diameter small cylinders but unfort' I only have the bottom part

thanks mate

[Dennis]

Graham

I just had a look at a data sheet that I must have downloaded from Vixen North America for my VC200L and Reducer.

I have marked the missing ring that I think you are looking for.

Cheers

Dennis