#1  
Old 23-08-2020, 08:07 PM
Astroboy33 (Steve)
Registered User

Astroboy33 is offline
 
Join Date: May 2020
Location: Wyberba, Queensland
Posts: 11
EQ8RH v iOptron CEM120EC

I am looking for a good heavy duty mount to add to my fixed slide off roof observatory.
I am coming down to the Skywatcher EQ 8 RH v iOptron CEM120EC

Comments? Alternatives?
Reply With Quote
  #2  
Old 23-08-2020, 09:48 PM
Logieberra's Avatar
Logieberra (Logan)
Registered User

Logieberra is offline
 
Join Date: Mar 2010
Location: Canberra
Posts: 1,584
Join the iOptron Users Group on Facebook. Perhaps also chat to Diego at Sidereal Trading as they sell both brands. They will have views.

Last edited by Logieberra; 24-08-2020 at 10:32 PM.
Reply With Quote
  #3  
Old 24-08-2020, 01:51 AM
Xeteth (David)
Registered User

Xeteth is offline
 
Join Date: Jul 2019
Location: Melbourne, Australia
Posts: 127
If you're going to be spending that kind of money I'd consider something like the Astrophysics Mach 2GTO. It has a slightly lighter payload capacity though.

There's also the 1100GTO but it's quite pricey if you want encoders.

Last edited by Xeteth; 24-08-2020 at 02:17 AM.
Reply With Quote
  #4  
Old 24-08-2020, 02:39 PM
Astroboy33 (Steve)
Registered User

Astroboy33 is offline
 
Join Date: May 2020
Location: Wyberba, Queensland
Posts: 11
Thanks David and Logan for the replies, good options, will follow up.
Thanks again
Reply With Quote
  #5  
Old 24-08-2020, 10:28 PM
John K's Avatar
John K
Registered User

John K is offline
 
Join Date: Sep 2005
Location: Melbourne
Posts: 1,419
There’s also the EQ8 IO Group and lots of commentary on Cloudy Nights about the EQ8 - if you’re planning on imaging with anything over 1000mm proceed cautiously due to the Dec backlash issues with the EQ8.

My money would also by on an AP Mount with that sort of budget.

John K.
Reply With Quote
  #6  
Old 02-09-2020, 01:58 PM
lazjen's Avatar
lazjen (Chris)
PI cult member

lazjen is offline
 
Join Date: Dec 2012
Location: Flaxton, Qld
Posts: 1,876
I've got the CEM120EC2. If I was to buy again, I would just get the CEM120 and no encoders to save money.

When guiding, you have to use long exposures/guide rates to avoid some issues with the encoders and oscillation. From memory, over 2 or 3 seconds at least - especially for calibrations. Once you've got your setup and dialed in, it's generally not an issue, since long exposure guiding rates are easy to do (and achieve).

For me, the hardware of the CEM120 is good with all the mount connections, etc. iOptron though are not great on the software side and also are quite slow with updates. There's also missing features (e.g. modelling) that have no signs of being done.

If you are set on getting encoder(s) on a mount, I'd be wary on the iOptron (or any equivalent mounts), unless you can test it to your satisfaction and return it if it doesn't perform as required.
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 07:44 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Advertisement
Limpet Controller
Advertisement
Testar
Advertisement
NexDome Observatories
Advertisement
Bintel
Advertisement
Astronomy and Electronics Centre
Advertisement