ICEINSPACE
Moon Phase
CURRENT MOON
Waxing Gibbous 96%
|
|
28-09-2013, 02:11 PM
|
|
Space Cadet
|
|
Join Date: Feb 2007
Location: Sydney
Posts: 1,411
|
|
Whats your personal FWHM cut off point?
Just curious what the maximum FWHM is before you chuck an image.
I've notice with my own images that they can start out in the early evening at about 2.15 and as the night goes on it can get as high as 5.6.
I normally chuck anything above 4.5, just wonder what you do?
Cheers
|
28-09-2013, 03:13 PM
|
|
Registered User
|
|
Join Date: Apr 2010
Location: ardrossan south australia
Posts: 4,918
|
|
below about 3 arc sec, priority is luminance or Ha data - anything much worse and I do colour channels only, in the hope that I might get better lum at some later date. Good conditions around here are about 2.5 - occasionally better.
Anything above 5.5 and I go to bed.
|
28-09-2013, 04:26 PM
|
|
Colour is over-rated
|
|
Join Date: Sep 2005
Location: Newcastle, Australia
Posts: 2,414
|
|
Good conditions here probably more like 3.0.... although it does improve through the wee hours, but these days I'm in bed by then!
I make the most of the clear nights, when pretty bad bin 2x2 and chase asteroids...
|
28-09-2013, 05:01 PM
|
|
Registered User
|
|
Join Date: Oct 2005
Location: Junortoun Vic
Posts: 8,911
|
|
I suppose another benefit of doing spectroscopy, is you can handle any light pollution and any seeing conditions!!
The processing of the spectrum "drops" out light pollution, and adjustment of the entrance slit looks after the FWHM issues. Majic!!
|
28-09-2013, 05:04 PM
|
|
ze frogginator
|
|
Join Date: Oct 2007
Location: Sydney
Posts: 22,062
|
|
Quote:
Originally Posted by White Rabbit
Just curious what the maximum FWHM is before you chuck an image.
I've notice with my own images that they can start out in the early evening at about 2.15 and as the night goes on it can get as high as 5.6.
I normally chuck anything above 4.5, just wonder what you do?
Cheers
|
Looks like you might get out of focus as temperature drops. 2.5/3 is good. Anything over 4 is not good.
|
28-09-2013, 07:05 PM
|
|
Registered User
|
|
Join Date: Jan 2011
Location: Rylstone, NSW, Australia
Posts: 1,403
|
|
Quote:
Originally Posted by White Rabbit
Just curious what the maximum FWHM is before you chuck an image.
I've notice with my own images that they can start out in the early evening at about 2.15 and as the night goes on it can get as high as 5.6.
I normally chuck anything above 4.5, just wonder what you do?
Cheers
|
'
Are you asking because the weather in Sydney has been shocking in terms of seeing? A pity with all these clear days as the FWHM I've been seeing has mostly been 5+. I've just packed it in in frustration! I'm pretty happy when it gets below 2.5-3...
Peter
|
28-09-2013, 07:56 PM
|
|
Registered User
|
|
Join Date: Mar 2010
Location: Canberra
Posts: 1,638
|
|
Peter, how do our TheSkyX HalfFluxDiameter HFD figures correspond to FWHM? The same? If so, in the burbs of Canberra, I never see below 3. Evenings start at mid 5's and get marginally better over time.
|
28-09-2013, 09:44 PM
|
|
Registered User
|
|
Join Date: Aug 2005
Location: Melbourne
Posts: 1,694
|
|
Surely the numbers here are subjective, don't they depend on your image scale? Or does your software take that into account? Are the numbers here expressed in arc sec or pixels?
Cheers
Stuart
|
28-09-2013, 10:05 PM
|
|
Colour is over-rated
|
|
Join Date: Sep 2005
Location: Newcastle, Australia
Posts: 2,414
|
|
Quote:
Originally Posted by rat156
Surely the numbers here are subjective, don't they depend on your image scale? Or does your software take that into account? Are the numbers here expressed in arc sec or pixels?
Cheers
Stuart
|
You're right - depends on scale, also really depends on the field you are measuring.
|
29-09-2013, 07:21 AM
|
|
Registered User
|
|
Join Date: Jan 2011
Location: Rylstone, NSW, Australia
Posts: 1,403
|
|
Quote:
Originally Posted by Logieberra
Peter, how do our TheSkyX HalfFluxDiameter HFD figures correspond to FWHM? The same? If so, in the burbs of Canberra, I never see below 3. Evenings start at mid 5's and get marginally better over time.
|
Hi Logan,
I normally don't pay much attention to the HFD in TSX as I use FocusMax. Generally I find the HFD after using FocusMax is higher than the FWHM values I see when inspecting the images in CCDInspector which of course uses actual scope resolution in the calculations.
For example after focusing Ha the average HFD from FocusMax = 3.99
The range of FWHM over 7 images 10 min guided CCDInspt = 1.96-2.13
So, perhaps a 50% reduction. I'm not sure how the HFD value is calculated in FocusMax. Perhaps I have not set something up in the software properly but I have not found anywhere to set in the imaging scale.
Peter
|
29-09-2013, 07:45 AM
|
|
Registered User
|
|
Join Date: Mar 2010
Location: Canberra
Posts: 1,638
|
|
Thanks Peter. Found a little something from Mr Ron Wodasky on this, which answers my Q:
FWHM is what you would need to be concerned with if image sharpness is what you are looking at.
Half-flux diameter is used on out-of-focus star images to aid in focusing away from best focus. It is a good measure for determining exactly how far from focus you are, and thus is very useful for a software product like FocuxMax. It's not very useful for human eyes, however, since we are mostly concerned with knowing when we are at good focus.
FWHM is useful for that - you want the smallest FWHM you can get if you are focusing yourself, or if you are evaluating seeing conditions (better seeing = smaller FWHM). More specifically:
Half flux diameter is the distance where half of the total light flux is inside that diameter, and half is outside.
FWHM is the diameter of a star image at half the height of the maximum brightness level.
Last edited by Logieberra; 29-09-2013 at 11:13 AM.
|
29-09-2013, 08:39 AM
|
|
ze frogginator
|
|
Join Date: Oct 2007
Location: Sydney
Posts: 22,062
|
|
Quote:
Originally Posted by rat156
Surely the numbers here are subjective, don't they depend on your image scale? Or does your software take that into account? Are the numbers here expressed in arc sec or pixels?
Cheers
Stuart
|
Software accounts for this. I image from 0.5 arc second per pixel up to 11 asp sometimes. So you have to account for various FL. I rarely got under 2. Maybe 1.8 on an exceptional night. Routinely between 2 and 3. 4 and over is noticeably blurry and bloated up close.
|
29-09-2013, 09:37 AM
|
|
Professional Nerd
|
|
Join Date: Nov 2011
Location: Strathalbyn, SA
Posts: 916
|
|
Does spot size and pixel size have any role here?
|
29-09-2013, 11:31 AM
|
|
Registered User
|
|
Join Date: Feb 2006
Location: Sydney
Posts: 17,916
|
|
I am not convinced these FWHM numbers are always meaningful.
I think it may vary with software. I would just look at the image and is it sharp or not rather than a number.
With long focal length bad seeing becomes obvious because its very hard to achieve a focus. It looks out of focus when its not.
Greg.
|
29-09-2013, 02:50 PM
|
|
Space Cadet
|
|
Join Date: Feb 2007
Location: Sydney
Posts: 1,411
|
|
Thanks guys.
I use CCD inspector to monitor my imaging folder live. As soon as a new image gets deposited it measures it for various attributes FWHM being one of them.
I suspect that my ever degrading FWHM has to do with three things, temprature, seeing and the angle of the object relative to the horizon. I notice that the closer it gets to the horizon the worse my FWHM gets. I'll need to add a few more focusing runs in my sessions.
I just wish to god that Software Bisque would hurry up and develop the camera add on a bit more to allow automated focusing runs between filters selection and temperature change. I'm kinda wondering why I paid so much for it when you consider programs like Astro art and the likes.
|
29-09-2013, 03:55 PM
|
|
Registered User
|
|
Join Date: Feb 2006
Location: Sydney
Posts: 17,916
|
|
Quote:
Originally Posted by White Rabbit
Thanks guys.
I use CCD inspector to monitor my imaging folder live. As soon as a new image gets deposited it measures it for various attributes FWHM being one of them.
I suspect that my ever degrading FWHM has to do with three things, temprature, seeing and the angle of the object relative to the horizon. I notice that the closer it gets to the horizon the worse my FWHM gets. I'll need to add a few more focusing runs in my sessions.
I just wish to god that Software Bisque would hurry up and develop the camera add on a bit more to allow automated focusing runs between filters selection and temperature change. I'm kinda wondering why I paid so much for it when you consider programs like Astro art and the likes.
|
CCDinspector is a handy program. I'll have to get that.
In CCDstack if you click on several different stars you'll get several wildly different FWHMs. Hence my scepticism. Larger stars inevitably give a large FWHM and the lowest FWHM will be a small tight star near the centre of the image.
Greg.
|
29-09-2013, 04:24 PM
|
|
Registered User
|
|
Join Date: Sep 2011
Location: Adelaide
Posts: 954
|
|
Quote:
Originally Posted by gregbradley
CCDinspector is a handy program. I'll have to get that.
In CCDstack if you click on several different stars you'll get several wildly different FWHMs. Hence my scepticism. Larger stars inevitably give a large FWHM and the lowest FWHM will be a small tight star near the centre of the image.
Greg.
|
The thing here is FWHM is supposed to be for you to measure the relative quality of each frame. The result it gives you is an average of the particular images FWHM. This means that you can compare each images focus and guiding against another image. This is how I use FWHM, because you are right different software will report different absolute numbers, but as long as you are using one piece of software you can gauge relative quality.
|
30-09-2013, 11:57 PM
|
|
Registered User
|
|
Join Date: Apr 2010
Location: ardrossan south australia
Posts: 4,918
|
|
For FWHM to be useful as a quality measure within a given system, it does not matter what the units are. However, if you use it to compare with the results others get - which was implicit in the OP question - then the system FWHM in pixels must be converted to arc secs via the plate scale.
I just did a comparo to see how much measures varied with software - Pixinsight, Iris and Nebulosity all reported ~ the same results (well within 10%) for a few chosen stars (which must be unsaturated of course) in a recent image. Pixinsight gave almost identical FWHM to Iris when forced to use Gaussian rather than Moffat profiles. Neb uses HFR (half flux radius) which is similar to FWHM, but being a radius, needs to be doubled to a diameter to be comparable - results were very similar to the other two when this was done.
FWHM (or HFD) in arc seconds is a useful absolute measure of seeing for any scope larger than about 100mm, provided the pixel sampling is reasonably close to the Nyquist optimum.
Last edited by Shiraz; 01-10-2013 at 12:12 AM.
|
01-10-2013, 06:55 AM
|
|
Registered User
|
|
Join Date: Aug 2009
Location: Waitakere Ranges, New Zealand
Posts: 2,260
|
|
Interesting thread. I usually experience between 2" and 3". I have seen below 2" on occasion, but it's rare. If it's over 3" I switch to taking colour, binned 2x2. I rarely see it higher than 3.5-4" though (only on a few nights per year).
|
01-10-2013, 09:42 AM
|
|
Space Cadet
|
|
Join Date: Feb 2007
Location: Sydney
Posts: 1,411
|
|
Yes it is very interesting and little over my head. I have much to learn, things are never as simple as they seem with this hobby. I love the challenge though.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +10. The time is now 11:54 PM.
|
|