#1  
Old 10-01-2019, 09:13 AM
garymck (Gary)
Registered User

garymck is offline
 
Join Date: Aug 2005
Location: Geelong
Posts: 662
PC controlled Flat Panel

Hi,

have just built an Arduino / PC controlled flat pane. Used one of these:

https://www.ebay.com.au/itm/A3-LED-L...MJSy:rk:3:pf:0

Thread here:

https://www.cloudynights.com/topic/5...ak-flat-panel/

Arduino sketch here:

https://github.com/jwellman80/ArduinoLightbox

Can be controlled by Sequence Generator Pro (select Alnitak) or Voyager (select Arduino)

Auto flats here I come!

cheers
Gary
Reply With Quote
  #2  
Old 10-01-2019, 12:33 PM
multiweb's Avatar
multiweb (Marc)
ze frogginator

multiweb is offline
 
Join Date: Oct 2007
Location: Hinchinbrook
Posts: 17,757
Can you change the brightness of the panel as well?
Reply With Quote
  #3  
Old 10-01-2019, 01:20 PM
garymck (Gary)
Registered User

garymck is offline
 
Join Date: Aug 2005
Location: Geelong
Posts: 662
Yes - SGP has a slider that gives 256 levels of brightness. Trying out Voyager tonite to confirm it does as well..
Gary
Reply With Quote
  #4  
Old 10-01-2019, 02:56 PM
multiweb's Avatar
multiweb (Marc)
ze frogginator

multiweb is offline
 
Join Date: Oct 2007
Location: Hinchinbrook
Posts: 17,757
Quote:
Originally Posted by garymck View Post
Yes - SGP has a slider that gives 256 levels of brightness. Trying out Voyager tonite to confirm it does as well..
Gary
That's pretty cool. I have the same panel but have to hold the power button to dim to the required brightness.
PS: ha I just noticed the power plug is a DIN type plug. I have a mini USB port so it probably works differently although the panel looks exactly the same cosmetically.
Reply With Quote
  #5  
Old 10-01-2019, 05:41 PM
garymck (Gary)
Registered User

garymck is offline
 
Join Date: Aug 2005
Location: Geelong
Posts: 662
You have to take off the back and alter the wiring. The internal circuitry is rendered obsolete. The arduino uno provides PWM power to control the light level. The uno is in turn controlled by SGP or Voyager such that automated flats can be taken as part of an imaging sequence.

Gary
Reply With Quote
  #6  
Old 10-01-2019, 06:03 PM
multiweb's Avatar
multiweb (Marc)
ze frogginator

multiweb is offline
 
Join Date: Oct 2007
Location: Hinchinbrook
Posts: 17,757
Good stuff.
Reply With Quote
  #7  
Old 11-01-2019, 05:30 AM
mswhin63's Avatar
mswhin63 (Malcolm)
Registered User

mswhin63 is offline
 
Join Date: May 2009
Location: Warnbro, Western Australia
Posts: 3,320
I have concerns regarding PWM controllers in Astro stuff. Capturing lights are taken on high shutter speeds and could image during a off state of the PWM signal. It may or may not be an issue just a thought.
Really the better option would be current set for light level so that the LED are on continuously.
Reply With Quote
  #8  
Old 11-01-2019, 08:10 AM
garymck (Gary)
Registered User

garymck is offline
 
Join Date: Aug 2005
Location: Geelong
Posts: 662
Flats are normally at least a couple of seconds long, taken with a very dim panel, so not an issue....

Gary


Quote:
Originally Posted by mswhin63 View Post
I have concerns regarding PWM controllers in Astro stuff. Capturing lights are taken on high shutter speeds and could image during a off state of the PWM signal. It may or may not be an issue just a thought.
Really the better option would be current set for light level so that the LED are on continuously.
Reply With Quote
  #9  
Old 11-01-2019, 07:52 PM
jwoody's Avatar
jwoody (Jeremy)
Registered User

jwoody is offline
 
Join Date: Aug 2011
Location: Ormeau Hills, Australia
Posts: 279
Hello Gary
Did you use the TIP 3055 transistor or something else?
Thanks
Jeremy
Reply With Quote
  #10  
Old 11-01-2019, 08:56 PM
garymck (Gary)
Registered User

garymck is offline
 
Join Date: Aug 2005
Location: Geelong
Posts: 662
Quote:
Originally Posted by jwoody View Post
Hello Gary
Did you use the TIP 3055 transistor or something else?
Thanks
Jeremy
Used a TIP35C picked up in error from Jaycar :-) wiring was the same....(but 25 amp capacity is a bit of overkill)

Beware the schematic early in the thread on CN - it is wrong and will kill an UNO. Read post number 5 - I wired it up per the written instructions here.

I believe a corrected schematic was posted later in the thread.

Gary

PS It is really cool watching Voyager change the light level until exposures reach the target ADU
Reply With Quote
  #11  
Old 11-01-2019, 11:44 PM
jwoody's Avatar
jwoody (Jeremy)
Registered User

jwoody is offline
 
Join Date: Aug 2011
Location: Ormeau Hills, Australia
Posts: 279
Cheers, thank you
Reply With Quote
  #12  
Old 12-01-2019, 01:07 PM
RobF's Avatar
RobF (Rob)
Mostly harmless...

RobF is offline
 
Join Date: Jul 2008
Location: Brisbane, Australia
Posts: 5,399
Thanks guys. Looks like there should be no reason this couldn't replace the manual PWM controller I'm using with my 12V more traditional box-shaped LED lightbox.

Its surprising how much time you can spend on a good night, or early in the AM after a long session, trying to get good flats - particularly if have been shooting NB with LRGB (huge differences in light output required). The naughty solution is just not shoot them - which of course reduces quality of the final data.

Currently image through Sequence Generator so its tantalizing how close automated flats could be. Love how arduino etc are making electronic solutions more accessible to amateurs!
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 06:03 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
Lunatico Astronomical
Advertisement
SkyWatcher Australia
Advertisement
Bintel
Advertisement
Nitecore
Advertisement
NexDome Observatories
Advertisement
Meade Australia
Advertisement
OzScopes Authorised Dealer
Advertisement
Astronomy and Electronics Centre
Advertisement