Looks like you need a 12V power distribution panel on the mount. You might want to take a look into getting a Mount Hub Pro. Or maybe a West Mountain Radio RIGrunner.
Please tell us about your shed modifications. Looks like you have haven't made it into roll off roof?
The scopes are an RC8 and a William Optics 110mm FLT TMB.
The shed is a basic 2x2. It is marginally different from some designs in that the roof hangs from a frame and slides off as opposed to sitting on one and rolling off.
i can't get my mount lights to come on with the whistle when i turn on the 48v power supply although my power supply light is on scope mount is dead/ any help please.?
i can't get my mount lights to come on with the whistle when i turn on the 48v power supply although my power supply light is on scope mount is dead/ any help please.?
Probably best to start a new thread....
I had that happen once on a pme.. Turned out it was a faulty auto guider cable, giving a constant signal. So unplug all unnecessary cables to start diagnosing.
I had that happen once on a pme.. Turned out it was a faulty auto guider cable, giving a constant signal. So unplug all unnecessary cables to start diagnosing.
Are you getting the alarm signal/beep?
i have unpluged everything including the guider however when i flick the switch to power up nothing happens no short whistle or power the tcs,ra dec don't light up either
i have unpluged everything including the guider however when i flick the switch to power up nothing happens no short whistle or power the tcs,ra dec don't light up either
Julian. Take a photo of how you connected power supply. Do you have a volt meter ? check the output and make sure you are getting 48v to the mount.
What scopes u got riding on her ? Mines in a tin shed as well hehe.
