|
QHY10 One Shot Colour Camera - Has been Sold
Selling my QHY10 one shot camera 3.5 months old as new purchased from Gama Electronics
Reason for selling due to light pollution I've decided to purchase a mono camera with filter wheel to take LRGB images
Asking for $2200.00 AU
Specifications
QHY10 CCD camera spec
CCD sensor ICX493AQA
CCD size Typical 1.8inch(APS size)
Total pixel 3964*2712 (Note 1)
Effective pixel 3900*2616
Pixel size 6.05um*6.05um
CCD readout Type 2 field(1*1binning)
Progressive Scan(2*2,4*4binning)
Full Well Approx 45Ke-
Peak QE 60%@geen.50%@red and blue
Anti Blooming Gate Yes,-100dB
Capture Download Speed 18sec(1*1binning)
9sec(2*2binning)
4sec(4*4binning)
Preview speed 4sec(1*1binning)
2sec(2*2binning)
1sec(4*4binning)
Support Binning 1*1,2*2,4*4
Readout speed 600kpixel/s, 3Mpixel/s
Readout Noise Typical 8-10e-
System Gain 0.7e-/ADU
Dynamic Range 74dB
CDS Yes
ADC 16bit
Cooling Two stage TEC
Fan Build in Active Fan
Maximum Delta T 45degree below ambient
Temperature regular Yes
Power consumption(INPUT=12V) Minimum(TEC OFF) 3.6Watt
TEC=50% 13Watt
Maximum(TEC=100%) 30Watt
Input voltage DC12V(Input to DC201 adapter)
Safe Range(11V-13.5V) [Note 2]
Telescope Interface M42/0.75 screw & 2inch T ring
Maximum Center adjustment +-0.5mm
Maximum Tile adjustment 1Degree
CCD sensor to front location surface 20mm(without tile adjust ring)
23mm(with tile adjust ring)
Weight(Camera body only, without
DC201 and cables)
390g(without tile adjust ring)
425g(with tile adjust ring)
Camera size Diameter=63mm
Length=120mm
Please PM if interested
Jim
Last edited by Jfinis; 02-09-2011 at 12:58 PM.
Reason: Forgot to add Specifications
|
