Takahashi FS-128 5inch Fluoride ( Excellent condition )

[looking up (Steve)]

SOLD Thanks to all responded.

Hello to all
I would like to offer for sale my Takahashi FS-128 5inch Fluorite refractor.
Condition is excellent condition.
Optics pristine.
One or two small paint chips no bigger than 3mm.
Purchased from Japan ( about 2 years old )
Will come with scope tube ring and 7 by 50 Tak finder. Please only serious offers only.
I will be happy to answer any questions
This is only the second time I have tried to sell on this site hope I have placed in the right spot.
Reduced price $3800 firm
Kind regards
Stephen

[allan gould]

Can you give us an idea of the money you would be asking?

[iceman (Mike)]

Can you post some photos of the mount?

[looking up (Steve)]

Hello
Thanks for your question
I will have the mount in about a week its on its way from Japan.
I can post some images then no problems.
Thanks Stephen

[looking up (Steve)]

Hello
Thanks for your question
For the Tak 4500 neg
For the Vixen mount 4700 neg Both in mint condition
Thanks again Stephen

[Gerald Sargent]

You say mount on it's way back from Japan - why did it go there ?

[looking up (Steve)]

Hello
Thanks for your question.
I have purchased from Japan from a good mate its about 2 years old top of the range Vixen of course. Things have changed need to move some of my gear for another project.
Thanks Stephen

[Dennis]

Hello,

What software version is the Skysensor 2000? Is it the release that has the auto guiding connector and functionality, as I understand Vixen had to withdraw this capability in some later models for the US market due to FCC compliance issues of RF emission?

Thanks

Dennis

[looking up (Steve)]

Hello
Thanks for your question
I will be receiving the Mount in about a week.
The mount is about 2 years old purchased off a friend in Japan.
Once I get it I will let you know software version and auto guiding connector and functionality.
Thanks

[iceman (Mike)]

Maybe you should list it when it actually arrives and you can post pictures and information about it.

[looking up (Steve)]

Thanks
will do

Cheers

[Dennis]

Originally Posted by looking up

Hello
Thanks for your question
I will be receiving the Mount in about a week.
The mount is about 2 years old purchased off a friend in Japan.
Once I get it I will let you know software version and auto guiding connector and functionality.
Thanks

Thanks for that Stephen. In that case, I suspect it will have the hardware (auto guiding connector) and software functionality implemented, if the mount was originally sold in Japan for the local market, as Vixen only ran into the FCC issues when a major US competitor dobbed them in for exports to the US.

Cheers

Dennis

[Gerald Sargent]

If you have received the Atlux have you been able to
get the controller to work in the Southern Hemisphere ?
If so could you please contact me directly Sargentg@
bigpond.net.au. I have an Atlux and am having a problem
with the controller, Gerald Sargent