[NOT REQUIRED] Finder Base with 5mm screw (e.g. Baader #2457000A)

[MortonH]

Trying to see if I can put a Vixen/Synta style finderscope base on my SV66ED. It has a single 5mm hole for mounting the base. The 5mm thread is different from most other scopes.

Currently I have a William Optics red dot finder but their base doesn't fit typical Vixen/Synta finderscopes.

The Baader finder base mentioned above is Vixen/Synta fitting and also takes a 5mm screw, which would allow me to attach it to the SV66ED. Not aware of others but open to suggestions.

Please PM me if you happen to have one lying around.

Cheers.

[FlashDrive (Poppy)]

Morton .... I'm sure I might have one here in my box of bits.

Will check tomorrow and let you know......

Col.....

[MortonH]

[MortonH]

Still looking (Col's one has gone)

[MortonH]

bump

[LewisM]

Not exactly sure what you mean Morton, but I have spare Vixen finder base and I can drill the holes to 5mm if that helps??? Confused.

I can also make it anodise red looking if you like...