RC experts advice please - servos

bloodhound31 · #1 02-10-2013, 10:32 PM

Does anyone know of a servo with a lower profile than this one at 23mm high?

Baz.

acropolite (Phil) · #2 02-10-2013, 11:00 PM

Baz, you can get servos considerably smaller, but the available torque drops. If you can do with less torque there are a whole lot of micro and mini servos available. Look at the Servos & parts link. http://www.hobbyking.com/hobbyking/s...ght_Left_.html

bloodhound31 · #3 02-10-2013, 11:52 PM

Thanks Phil. Those micro servos only push 80 grams. I need a couple of kilos of torque at least.

Baz.

Auster1b (Neil) · #4 03-10-2013, 08:03 AM

Baz, look for slim wing servos from Phil's link.

One has 6kg of torque, make sure your nose is in before operating !

http://www.hobbyking.com/hobbyking/s...ing_Servo.html

Neil.

bloodhound31 · #5 08-10-2013, 02:23 AM

Quote:

Originally Posted by Auster1b

Baz, look for slim wing servos from Phil's link.

One has 6kg of torque, make sure your nose is in before operating !

http://www.hobbyking.com/hobbyking/s...ing_Servo.html

Neil.

Darn it! It is much slimmer..... but it's 90 degrees off the axis I need the rotation.