Quote:
Originally Posted by avandonk
Great image Jase. I am sure it is a mirror image of the real objects. I notice this happens quite often with top end imaging cameras. Is there some reason for this that is inherent in these cameras and should be looked out for?
Below is your image flipped.
The image nevertheless shows great detail and proves the old adage, longer bigger and careful processing.
Bert
|
Thanks Bert. Very observant. Indeed, the image has been flipped but not due to the equipment (though could have been if you were to consider camera orientation). I flipped the image to put NGC6357 into the top left corner for aesthetic reasons. I felt it compelling to place something at top left due to void. Similar to my previous NGC1365 post with the bright star. Some would simply crop this out. I read an article on general composition of images (all kinds, not just astro related). It was clear that as the western world reads from left to right, top to bottom, when possible a feature of some description placed top left of the frame allows the viewers eye to use as a reference point. I thought about this and decided to give this a go with the image. Nothing ventured, nothing gained.
Technically, there is nothing to look out for with these cameras. The only mirror image associated with the SBIG line of camera is the self guide chip. This is reflected via a mirror so that the guider can operate as close to the center of the optical light path. The imaging chip is not reflected so no mirror flip should be expected. I guess in the old days, you noted many astro images state north is up. This has somewhat become blurred as you can rotate and skew images to present them how you like it. Having seen your HDR posts of this region, you are all too familiar with the orientation. I'm pleased you challenged me on this and hope I've provided clarity on my intent. Thanks again for your comments Bert.
Quote:
Originally Posted by renormalised
Nicely done, jase!!!
I was just thinking, the neb that looks like a crab, I just thought of a good name for it..... the "mud crab"  
|
Thanks Renormalised. I think it looks like a lobster with its tail. With the limited Ha data I couldn't emphasise the tail enough without introducing noise so this was a compromise. You're on the money regarding mud crab considering the dusty/muddy coloured region.

. I wasn't too certain on the black point for this target. I think it could have been raised more. Not sure. Anyway thanks.