EQ6 Goto at Andrews for $1299 - No Stock

netwolf · #1 23-01-2007, 12:10 PM

Hi All,

This might be a mistake and I called and checked and there is not stock of EQ6 at Andrews but the website has changed recently in the last few days with an incredible price reduction on the Goto mount for $1299. Unfortunately there seems to be no stock.
http://www.andrewscom.com.au/site-section-10.htm

Regards
Fahim

iceman (Mike) · #2 23-01-2007, 12:18 PM

That can't be the skyscan 3 price can it?

netwolf · #3 23-01-2007, 12:26 PM

Well the page has changed in the last 3days Cause I called last week twice to get a Syntrek price as it was not listed and the Goto was listed for 2300ish.

Suddenly today when I checked to see why they had not called me back the page has changed. But there is no stock.

It also seems that the supplier is not selling the syntrek version of the mount anymore. They have withdrawn it and are now only selling the goto or the older non-goto mount with the older motors. Perhaps this is due to the advent of the EQ6Mod that does away with needing the hand controller.

The best price at present seems to be 1995 for the EQ6 PRo goto mount from telescopeshop.com.au as noted and purchased by one of the members here.

I think I might end up with a motorized dob rather than a equatorial mount. As I was investigating the polar view from my home and its there but not in a good location from the backyard.

Regards

iceman (Mike) · #4 23-01-2007, 12:35 PM

Bintel also have the EQ6 Pro for $1999, I think?

Are Andrews actually getting stock at that price?

ving (David) · #5 23-01-2007, 12:47 PM

sheesh!!! whats with that?

so you rang and confimed teh price fahim?

netwolf · #6 23-01-2007, 12:50 PM

No they would not confirm they said there is no stock and they will have to check with supplier and call me back.

Regards

Harpspitfire · #7 23-01-2007, 01:10 PM

when i called about the HEQ5- i was curious about the different mounts- i found out the skyscan is the same as the 'PRO' series mount- the only thing your paying for on the pro series is the fancy white paint

jjjnettie (Jeanette) · #8 23-01-2007, 01:17 PM

Mike, you've made the transition, how hard is it to manipulate the OTA onto the EQ6? Do you have to disassemble after each night, or is it a permanent fixture now.
Would a husky girl be able to cope with it?

g__day (Matthew) · #9 23-01-2007, 01:51 PM

1. Andrews informed me last week that the V3 controller still has many bugs, no hard fix date yet in place and advised avoid it.

2. The web site still lists the goto EQ6 for $1299 as of right now:

Skywatcher Equatorial MountsTypePrice $(AUD)EQ5 with aluminium reipod legs$399.00EQ6 Go-To has steel tripod legsNow $1299.00

Rob · #10 23-01-2007, 02:20 PM

I just rang Andrews and they are about to take the EQ6-GOTO off the website. They are waiting on information from their supplier. The guy I talked to didn't know what the price will be when they again have them in stock. It sounds like it will not be $1299

.

Rob

ving (David) · #11 23-01-2007, 02:38 PM

thats a crying shame rob. $1200 would have been teh deal of the decade even if it wasnt vers 3.0!

i noticed the they have taken teh majority of the mounts off teh website

Astroman (Andrew Wall) · #12 23-01-2007, 05:00 PM

I dont see the EQ MOD being the reason for the Syntrek removal, the EQMOD is still under development with many modules still to be implemented into the code. I would put it down to sales rather than the development of the mod.

Maybe the EQ7 isn't far away

netwolf · #13 23-01-2007, 06:28 PM

I think the 1299 price is a mistake as noted in my orginal post. I was informed by Andrew (when I called for the 2nd time chasing the Syntrek price and availability) last week that he was not happy with Skywatcher supply and was moving more into the Celestron gear. I am sad that after calling the 3rd time today, I still have not received my call back. Other vendors were quick to come back to me that the EQ6Syn model will not be supplied by the Australian supplier. I was hoping against the odds that someone may have had stock of the last EQ6Syn.

Regards
Fahim

Scorpius (Dave) · #14 23-01-2007, 09:15 PM

Quote:

Originally Posted by netwolf

No they would not confirm they said there is no stock and they will have to check with supplier and call me back.

Regards

I am beginning to query Andrews prices. They are, on site lower than Bintel. But no stock. I phoned then last Friday to buy a 2sp GSO Focuser.. No Stock said would ring back but never did..
Phoned Bintel at midday Fri goods arrived 8am Monday. $8 more but Bintel Stands and Delivers

Check this out. The price is even less as an NVT member !!!
http://www.nvt.com.au/Telescopes/Sky...s-Inc-Tripods/

Skywatcher Heavy duty Deluxe Equatorial. Motorised. Pay loads up to 17kg. Code: HEQ5MNT This heavy-duty mount is a smaller version of the sturdy EQ6 mount. It is specially designed for observers who need the steadiness of the EQ6 mount. but find the EQ6 mount too physically demanding. Like the EQ6 mount. this high-precision equatorial mount features engraved aluminum setting circles and a latitude scale. built-in polarscope for both North and Southern Hemisphere use. large R.A. and DEC. locking clamps. electric slow-motion controls on both axes. and retractable counterweight shaft and counterweight. The proposed strong and rigid field tripod is remarkably stable with adjustable height. incorporating 1.5"-diameter steel tripod legs. http://images.nvt.com.au/product-ima...6330152_tn.gif Price: AUD $1,049.40 Freight Within Australia: AUD $18.00

Would a husky girl be able to cope with it? I reckon so also note steel legs (not you jjjnettie !)

netwolf · #15 23-01-2007, 09:59 PM

Scorpius, that is the same shop i mentioned Telescopshop.com.au looks like they have two websites. The theme is different but i think its the same layout. And same prices

Regards

ballaratdragons (Ken) · #16 23-01-2007, 10:03 PM

Yep, they link to each other.

If you go into the Telescopeshop.com.au site and sign up as a member you get an instant discount. Once you are a member the prices are displayed at the discount rate.

iceman (Mike) · #17 24-01-2007, 06:25 AM

Quote:

Originally Posted by jjjnettie

Mike, you've made the transition, how hard is it to manipulate the OTA onto the EQ6? Do you have to disassemble after each night, or is it a permanent fixture now.

I have to disassemble.. I don't have an observatory. I left my dob/platform out in the yard, covered with a tarp/cover usually. I could do the same with the EQ6 but am concerned about the electronics.

Quote:

Would a husky girl be able to cope with it?

I guess so, if you did it in small pieces.. The mount is very heavy.

alan meehan (Alan) · #18 24-01-2007, 07:38 AM

hi all
andrewes price is got to be wrong,i just brought the series 3 version of eq 6 from nvt i had to wait for shippment as they were selling fast .i have no complaints with the scope its great,even though its abit heavy but stron g dis,assembly is fairly simple taking it apart in sections,fortunatly i dont have to it is in a observatory,one thing would watch is keeping the scope electrics cool,my lxd55 meade drive has not worked since coming back from lostockme thinks because of the heat.

bojan · #19 24-01-2007, 08:29 AM

Quote:

Originally Posted by alan meehan

hi all
andrewes price is got to be wrong,i just brought the series 3 version of eq 6 from nvt i had to wait for shippment as they were selling fast .i have no complaints with the scope its great,even though its abit heavy but stron g dis,assembly is fairly simple taking it apart in sections,fortunatly i dont have to it is in a observatory,one thing would watch is keeping the scope electrics cool,my lxd55 meade drive has not worked since coming back from lostockme thinks because of the heat.

I do not believe heat has anything to do with electronics not working.
More likely it is humidity (water). If you have dew on circuits and the power is switched ON, the electrolysis may oxidize the already poor joint and cause fault. Usually, re-soldering restores the functionality.
Or, vibrations/shock was the cause....
Or damaged connectors (this can always happen on such occasions)..

B

ving (David) · #20 24-01-2007, 10:00 AM

Quote:

Originally Posted by Scorpius

I am beginning to query Andrews prices. They are, on site lower than Bintel. But no stock. I phoned then last Friday to buy a 2sp GSO Focuser.. No Stock said would ring back but never did..
Phoned Bintel at midday Fri goods arrived 8am Monday. $8 more but Bintel Stands and Delivers

Check this out. The price is even less as an NVT member !!!
http://www.nvt.com.au/Telescopes/Sky...s-Inc-Tripods/

Skywatcher Heavy duty Deluxe Equatorial. Motorised. Pay loads up to 17kg. Code: HEQ5MNT This heavy-duty mount is a smaller version of the sturdy EQ6 mount. It is specially designed for observers who need the steadiness of the EQ6 mount. but find the EQ6 mount too physically demanding. Like the EQ6 mount. this high-precision equatorial mount features engraved aluminum setting circles and a latitude scale. built-in polarscope for both North and Southern Hemisphere use. large R.A. and DEC. locking clamps. electric slow-motion controls on both axes. and retractable counterweight shaft and counterweight. The proposed strong and rigid field tripod is remarkably stable with adjustable height. incorporating 1.5"-diameter steel tripod legs. http://images.nvt.com.au/product-ima...6330152_tn.gif Price: AUD $1,049.40 Freight Within Australia: AUD $18.00

Would a husky girl be able to cope with it? I reckon so also note steel legs (not you jjjnettie !)

thats the heq5 not the eq6... i dont know wht jeanette wants to put on there but if its her reflector she'd need teh eq6 not the heq5. also thats not the goto one. I got the exact same mount from andrews for $799. its not listed on thier site any more tho. i think AOE has really good prices on teh heq5 if thats the way she wants to go