Teflon sheet, 0.35~0.4 mm thick ?

[bojan]

Anybody knows where to get this, I need a very small quantity - 300 x 15 mm.....

[OzEclipse (Joe Cali)]

https://www.ebay.com.au/itm/26504785...Bk9SR7DwoJaIZg

It's double the thickness you need. Heat press sheets are thinner.

Joe

[ChrisV (Chris)]

On ebay ptfe sheet. I bought some 0.5mm sheet a while ago but i just looked and I can see 0.2, 0.3, 0.4 - in various sizes from 50x50mm and up

[bojan]

Gents, thank you for info, I will try asap :-)

[Leo.G (Leo)]

Did you manage to find it Bojan?
I needed 0.5mm and think I got it from a seller on eBay but can't remember. I do know I used it for shimming my EQ5 PRO when I re-engineered it (I replaced the roller bearing with a tapered roller bearing), it had PET plastic shims and they would bind.
I did however ruin a very expensive engineering drawing compass using it to cut the precise outer and inner rings. I wasn't happy about that and I can not get the part (some German brand I can not remember, I bought the big set with pens and everything for previous studies (mechanical engineering)).

[sfarndell (Scott)]

Before motorisng and moving to roller bearings, I used to cut up 2L mik bottles instead of teflon - it's verly low friction, and a manageable thickness

[chrisp9au (Chris)]

Hi Bojan, Amazon have a pretty good range of Teflon, all thicknesses.
If you're a member, next day free delivery on most/many items
Got mine there, and a lot of other useful stuff!