Up for sale is a brand new SynGuider 2
I purchased it couple of years ago with the idea of guiding without using a pc
Never got around to using it.
Included is a power supply to go with it as shown in the photos.
(powered by a 12 cigarete plug style socket)
Only opened the box to see what was inside, so nothing has been used.
$250 ono plus postage
Last edited by bluesilver; 10-04-2021 at 07:57 AM.
Is that a 12 volt power supply or does that box on the end drop the voltage. If I purchased I would want to use a straight through 2.1 to 2.1 cable so would be supplying a full 12 volts. I am assuming the end is a 2.1 mm plug.
I haven't used it myself as it is still brand new and wrapped up.
But basically you plug one end into a cigarette lighter plug and the other into the Synguider.
This provides the Synguider with the correct Voltage that is required
Hope that helps.
Last edited by bluesilver; 27-03-2021 at 05:56 PM.