Go Back   IceInSpace > Equipment > ATM and DIY Projects

Reply
 
Thread Tools Rate Thread
  #1  
Old 19-01-2022, 08:22 PM
wooleybull's Avatar
wooleybull (MICHAEL)
Registered User

wooleybull is offline
 
Join Date: Aug 2021
Location: ARGENTON
Posts: 7
deforking 10" meade to fit to Eq mount

anyone have any info on deforking my 10" meade and fitting it to an EQ mount like a CEM 60 or better. i cant find anywhere that just gives the scope weight and are there kits avalible for the scope to fit the mount
Cheers Michael
Reply With Quote
  #2  
Old 20-01-2022, 12:02 AM
Dave882 (David)
Registered User

Dave882 is online now
 
Join Date: Nov 2020
Location: PADSTOW
Posts: 354
Hi Michael- I deforked my 10” lx50 and put it on a cgem. Not sure exactly what model you have but I believe the lx50 is identical fixing to lx200 and perhaps a couple other dual fork models. It’s surprisingly simple and took about 15min in total. I just googled a couple of forum posts for the instructions, but the only really really important key is to not try and slide the tube out of the forks- rather you need to pull apart the forks first.

Remove the DEC setting circles from the fork.
Then lay the scope on it's side and remove the 4 bolts that hold the one fork to the base. Remove 3x screws holding the first (smaller) fork to the ota (I think some mounts you can just remove one fork and lift it off the scope.) Flip it over and remove the 3x screws on the other fork. The scope will then lift out of the other fork. Then reinstall the same bolts to plug the holes in the ota.

Install a Losmandy D style plate (with radius blocks is better). The ota is now ready to use!

I think the ota is about 15kg. I would recommend eq6 or cgem eqivelant load rated mounts especially if you want to do any kind of imaging.
Reply With Quote
  #3  
Old 20-01-2022, 11:30 AM
Merlin66's Avatar
Merlin66 (Ken)
Spectroscopy Wizard

Merlin66 is offline
 
Join Date: Oct 2005
Location: St Leonards, Vic
Posts: 8,650
Over the years I've deforked all sizes of Meade LX200 scopes.
Just needs a bit of care...
Attached Files
File Type: doc Lx200_defork.doc (27.5 KB, 27 views)
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 06:13 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Advertisement
NexDome Observatories
Advertisement
Testar
Advertisement
Limpet Controller
Advertisement
Bintel
Advertisement
Astronomy and Electronics Centre
Advertisement