manually set your stops in DSLR Focus to what f stop you are going to image at. The faster the f ratio the more critical the focus. What is focused at f13 may not necessarily be in the CFZ (Critical Focus Zone) at f2.5.
Sorry Trevor, I am lost here as to what you were doing.
The camera should be in complete manual mode, correct? If so, set the aperture to max, (f1.8), and focus, with DSLR Focus. Then stop it down a stop or so depending on the aberrations that you suffer, or can't suffer.
Gary
The stars would not come into focus using DSLR the higher I set the AV value the better the focus appeared
Images taken at a lower f value appeared washed out or over exposed
My settings in DSLR Focus are ISO800, Tv 4sec, Av 2.5 or 2.8 (working from memory here I drop down a couple of stops to improve the stars at the edges and corners in the final image), Quality medium fine (or fine medium which ever way round it is.) When focusing I'll sometimes put a piece of blu tak against the body of the lens and the focus ring to apply a bit of resistance to focusing other wise its too easy to overshoot backwards and forwards. Don't forget that at f/1.8 you only have 7 thousands of a millimeter of focal zone to work with. It is very very challenging to nail that focus at f/1.8
Definitely persevere with it. Try the blu tak trick, especially if you have a bit of slop in the focus ring. I found that made a big difference in getting as close as I could to focus. After a while you get to know how much you need to turn and its quite easy to nail it.
Btw I don't use the DSLR graphing functions much anymore. I prefer to use the zoom icon set to about 6X and view a fairly faint star until it is all but one singe bright pixel with a few (4) fainter ones at 12, 3, 6, and 9 oclock. Remember to turn the zoom function off before trying to set the capture settings. It tends to lock up the ability to adjust settings until its turned off.
Av and Tv are the exposure and aperture settings that are set in DSLR Focus for the Focusing Run. Once the focusing run is finished Tv is set to Bulb and the Av (f/stop) is set at the original focusing setting (2.5?) or slower (2.5+) (but not faster 2.5-)
You have to be in M to be able to set these in the first place.
OK Paul, sounds like you know what you are doing, back in the old days, "Av" and "Tv" were "Aperture Variable" and "Shutter Variable", denoting aperture priority and shutter priority. Not manual.
How things have changed, or is it me, LOL.
Gary
Well not really Gary. They still relate to the same things but under Av setting on the camera as you know you change the f/ratio, under Tv you change exposure settings. Under M you can play with them all. Its just that in DSLR Focus you have them at your fingertips with the click of a mouse so no having to push buttons or spin dials on the camera. With DSLR Focus I have one group of settings for focusing and then when I'm ready to capture I switch to capture mode and change Tv to bulb and the Quality from fine medium jpeg to Raw or Raw+jpeg all from withing the program. I can then set the program for the number of exposures, interval, delays etc and let it do the hard yards of controlling the procedure.