Go Back   IceInSpace > Equipment > Astrophotography and Imaging Equipment and Discussions

Reply
 
Thread Tools Rate Thread
  #1  
Old 04-01-2009, 06:39 PM
Ian Robinson
Registered User

Ian Robinson is offline
 
Join Date: Jan 2007
Location: Gateshead
Posts: 2,205
Conversion of old pre GOTO CG5 to allow autoguider interface with old handpaddle

Any one here done this kind of conversion to their older preGOTO GEM ?

See http://www.awrtech.co.uk/remote.htm

I am considering getting AWR in the UK to do the conversion to my old (NON-GOTO) CG5 so I can set it up as an autoguided camera platform, manual guiding it is tedious. Involve adding some circuitry to the old handpaddle and adding an appropriate socket.

I am not interested in adding GOTO to the old CG5 , just an autoguider interface compatible with the Orion Autoguider, this will give this old work horse a new lease of life at minimum cost.
Reply With Quote
  #2  
Old 07-01-2009, 01:38 AM
Gama's Avatar
Gama
Registered User

Gama is offline
 
Join Date: Dec 2005
Location: Melbourne
Posts: 1,121
Ian, just buy a drive corrector.

I still have one from my Celestron 8" many many years ago.
It has different rates, guider input, DC to 240V and 240 to 240.
Plus it has a hand controller to speed or slow down manually.

This is what you should be looking for, and locally.

Theo
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 06:57 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Advertisement
Limpet Controller
Advertisement
NexDome Observatories
Advertisement
Bintel
Advertisement
Testar
Advertisement
Astronomy and Electronics Centre
Advertisement