Quote:
Originally Posted by AdamJL
Lights from night one, and any calibration frames go into the main tab.
The next nights (lights + calibrations) go into the next tabs (so 3 nights will have 3 tabs).
If I'm using darks, they go into the first tab (so long as they match the other nights, if not, those tabs will have their own darks)
seems to work fine. That's how I stacked my recent Tarantula image
|
Adam,
Thanks for your info
Is your camera left intact each night and using same focus , temperature and gain ?
If so, David the DSS developer advised you only have to use the Main Group tab or original tab and load everything in
If you move or remove the camera on any night , then option 2 in my post (his advice) is the correct way to calibrate and stack in DSS.
Remember darks and bias are only recording noise from the cameras electronics and are therefore common to any sub taken with same exposure time and gain etc.. they can be reused many times hence DSS makes a Master Dark or Master Bias for you to use
Cheers
Martin