[WITHDRAWN] Light Boxes - Page 9

Exfso (Peter) · #**161** 31-01-2012, 10:10 AM

Thanks David, enjoy mate.

Cheers

Peter

Exfso (Peter) · #**162** 09-02-2012, 04:24 PM

I have just cleared out my PM box, so anyone who wanted a lightbox and has not got back to me will have to resend their PM. I have kept stuff up to 2 months back from now. There are a few people who I have contacted with a quote that have not got back to me for whatever reason.

mithrandir (Andrew) · #**163** 12-02-2012, 05:44 PM

Peter, can you make a reducer so I can use my C8 lightbox do duty for my ED127 too, or is it simpler to get another lightbox.

Exfso (Peter) · #**164** 13-02-2012, 11:06 AM

Andrew, I could do that and have done so in the past, but I need the exact measurements of the light box. Usually I make the sleeve as I call it when I make the so called "master" light box, and I have it with me to refer to so the sleeve is a smooth fit. Without the current light box in situ, I am somewhat relying on the measurements provided to make one that is a good fit. Also obviously I need the outside diameter of the dewshield of the 127. Let me know what you decide via PM and I will get back to you with a cost.

Exfso (Peter) · #**165** 01-03-2012, 11:38 AM

Just for information I have had to clear out my PM box as it was nearly full. I have had a lot of people I sent messages to regarding queries about light boxes who have not replied to me, so if anyone is in that category, I no longer have the quotes I sent and they will have to be re-done. I cant really believe the amount of people who want a quote who do not have the decency to acknowledge my messages. It matters not to me if they want a light box or not, a simple yes or no thanks would suffice. I am trying to provide a service at a very reasonable cost for something that is not readily available.

Peter

Exfso (Peter) · #**166** 13-03-2012, 10:50 AM

Just bumping this up.

dmurton (David) · #**167** 30-03-2012, 12:41 PM

PM Sent

Regards

David Murton

Exfso (Peter) · #**168** 01-04-2012, 12:42 AM

No worries David.

Havent looked on here for a couple of days, but as you know I got the PM.

Cloudyagain (Neale) · #**169** 16-04-2012, 04:16 PM

The light box arrived today Peter. It is a work of art. Professional finish, professional packaging and it has been a pleasure to deal with you.

Highly recommended.

Neale.

Exfso (Peter) · #**170** 16-04-2012, 05:02 PM

No problems Neale, glad you are happy with it.

dmurton (David) · #**171** 19-04-2012, 06:22 PM

Peter,

Recieved the box today, and am very happy, fits both scopes like a glove, and the 'pot' gives a huge range in brightness for all my cameras. Many thanks and highly recommended.

Regards

David

Exfso (Peter) · #**172** 20-04-2012, 03:06 PM

My pleasure David, glad you are happy with the light box/s

Exfso (Peter) · #**173** 10-05-2012, 11:07 AM

I am starting to get some interest from the USA on these, that could be bigger than Ben Hur

Jen · #**174** 10-05-2012, 04:55 PM

Quote:

Originally Posted by Exfso

I am starting to get some interest from the USA on these, that could be bigger than Ben Hur

Woohoooo way to go Pete

okiscopey (Mike) · #**175** 11-05-2012, 07:53 PM

Hi Peter,

Just received the light box for the FSQ106ED.

Australia Post was a bit slow, but your work is exemplary. Perfect fit on the scope and a great range of even illumination with the built-in dimmer.

Highly recommended!

Mike (Kandos).

Exfso (Peter) · #**176** 13-05-2012, 01:06 AM

Glad you are happy with the light box Mike

Joshua Bunn (Joshua) · #**177** 20-05-2012, 11:39 AM

PM sent re. new 12.5" light box.

Exfso (Peter) · #**178** 20-05-2012, 02:56 PM

No worries Josh.

ntk.thava (Hamish Thava) · #**179** 08-06-2012, 09:04 AM

Hi, Please quote me a light box that would fit a skywatcher CFP2501 OTA.
Please email me the quot at ntk.thava@gmail.com

Thanks.

Thava

Exfso (Peter) · #**180** 08-06-2012, 10:20 AM

I have emailed you Thava.