#1  
Old 19-05-2022, 02:08 PM
Boozlefoot
Registered User

Boozlefoot is offline
 
Join Date: Nov 2016
Posts: 317
Vlr?

As the cloud ridden boredom sets in......this is the pointy end of my experimental open long refractor. 74mm f3000 glued achromat, 3 hours with the dremel modifying the objective holder (70mmf500SW OTA), old finder with the lenses removed for a "hood sight". The Skywatcher wedge will hopefully aid in alignment. The "body" will be a simple wooden beam (Guitar tuners & wire for pretensioning) on an AltAz pipe mount, and the focus assembly will be a macro photography mount for coarse focus and a 2" helical for fine mounted on that. Plan on using maybe a 28mm EP. I fully realise the image may not be up to everyone's standards, but this is an experiment (ongoing) after all. I start on the focuser end next week...... And probably not what Skywatcher envisaged.
Attached Thumbnails
Click for full-size image (VLR Objective Mount 1.jpg)
207.5 KB81 views
Click for full-size image (VLR Objective Mount 2.jpg)
181.6 KB71 views
Reply With Quote
  #2  
Old 24-05-2022, 02:45 PM
gb44 (Glenn)
Registered User

gb44 is offline
 
Join Date: Jul 2012
Location: Gold Coast
Posts: 237
What are you aiming for?

GlennB
Reply With Quote
  #3  
Old 24-05-2022, 03:11 PM
JA
.....

JA is offline
 
Join Date: Oct 2016
Location: Melbourne, Australia
Posts: 2,661
Hi BF,

3000mm - Very Long Refractor for sure !!!

Given that you already have the lens cell and front mount you could consider some using 75mm, 80mm or 90mm Stormwater or SWV pipe. The only issue would be painting the inside black. Also if you have the standard focuser from the older donor scope you could also bung that in at the end of the tube, with some adapters which are plentiful and in many designs for typical SWV and stormwater pipes. You could also add a strengthening rib or two if you found it necessary by simply gluing a rib to the outside of the tube.

Good luck with your project.

Best
JA

Last edited by JA; 24-05-2022 at 05:29 PM.
Reply With Quote
  #4  
Old 28-05-2022, 09:25 PM
Boozlefoot
Registered User

Boozlefoot is offline
 
Join Date: Nov 2016
Posts: 317
Thanks JA and Glenn.

Find the idea of an open refractor (no tube) will be an interesting project here as I have the fortunate circumstance of an above average dark site, Bortle 2 at the worst.

So - no OTA! The objective holder was from a write-off (busted focuser), seemed the best/lazy way to have a "coarse adjustable" pointy end, and it even comes with a dew shield. The focuser end will now be constructed from a used photographic bellows assembly for the coarse, then an adaptor and 2" helical focuser for fine focus. And nothing in between except the wooden mounting beam.

Probable targets will be moon 1st quarter and planets, expecting 17th century results!

Remember, it's all in good fun and helps while away the time till this cloud eventually shoots through.

And speaking of boredom........there's a windmill tower directly behind my obsy which is begging to become an aerial telescope!
Attached Thumbnails
Click for full-size image (Aerial scope.jpg)
70.7 KB23 views
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 02:17 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Advertisement
NexDome Observatories
Advertisement
Limpet Controller
Advertisement
Testar
Advertisement
Bintel
Advertisement
Astronomy and Electronics Centre
Advertisement