These instructions were originally posted by Russ on the SGL forum:
Hi all,
I installed the camera first using the INF file from the Morgans site. The camera is recognised as a Toucam 750K. (Ed. Copy the .inf file to a temp directory and then plug in the camera...when it goes looking for drivers point it to the directory)
I then followed the instructions for flashing a Toucam Pro II 840K to SPC900NC:
Philips SPC900NC uncovered
PLEASE GO CAREFUL AND READ THROUGH ALL INFO ON THE LINK ABOVE.
THIS MUST BE DONE USING A WINDOWS XP SYSTEM!
Download
WcRmac and the SPC900NC binary file. Install WcRmac and then copy the SPC900NC binary file to C:\Program Files\TWIRG\WcRmac\binary\8116
Start WcRmac, click the webcam tab at the top, choose DS Interface, select the camera in the window and connect. Click the Binaries tab and you should see the SPC900NC binary you copied to the 8116 folder earlier. Click the 'Get current and save as' button to back up the current binary file. Then highlight the new SPC900NC binary and click on the 'Load into cam' button. Close the program once done. Unplug the webcam.
(Ed. You then need to install the new drivers for the SPC900nc) and install the SPC900NC driver:
SPC900NC/00 Philips Webcam SPC900NC VGA CCD with Pixel Plus - Philips Support
Plug in the cam, windows will find the device and installs. Job done!
You need to have a webcam capture program running (WxAstrocapture,
Craterlet etc) while running the WcRMac.
Takes less than 2 mins.
NOTE: This must be done on a XP machine....No- It doesn't work under Win7
Ken