Go Back   IceInSpace > Equipment > Software and Computers
Register FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Rate Thread
  #21  
Old 30-09-2007, 02:20 PM
iceman's Avatar
iceman (Mike)
Sir Post a Lot!

iceman is offline
 
Join Date: Sep 2004
Location: Gosford, NSW, Australia
Posts: 36,799
Quote:
Originally Posted by JohnG View Post
Odd, I will go through my connection sequence.

Plug in the USB cable, turn the camera on and wait until the EOS Utility appears, shut it down.

Open ImagesPlus, open the camera control, select ED Camera Control.

Hit connect, then Refresh.

Camera connected.
I go through the same process, and I get the 3 errors "Not Supported", "cannot lock UI" and "RAW+Jpeg" as described above.

The only things I can think of:
1) Trial version of ImagesPlus (CD hasn't arrived yet) - but unlikely, it should be fully functional.
2) I don't have the Canon utilities installed. But that shouldn't matter either - I can still browse the contents of the Compact Flash from Windows Explorer. It still shows up as a "Canon EOS 350D Digital" in Windows Explorer.

I guess I'll have to ask ImagesPlus support?
Reply With Quote
  #22  
Old 30-09-2007, 02:23 PM
RB's Avatar
RB (Andrew)
Moderator

RB is offline
 
Join Date: Aug 2005
Posts: 26,561
Quote:
Originally Posted by iceman View Post
I've got a cable (courtesy RB, thanks!) which goes from the serial port to the side of my 350D, to allow me to control the camera using software like ImagesPlus, DSLRFocus etc.
Quote:
Originally Posted by iceman View Post
Are those instructions for DSLRFocus? I don't have that.

I'm trying to use ImagesPlus.
Yes, those instructions are for DSLR Focus, I thought you had that too.


Quote:
Originally Posted by iceman View Post
The only other thing I can think of, is that the cable RB made isn't quite right? Is it any different between a 300D and a 350D?
The cable was working flawlessly when it left here nearly two years ago Mike
and should work equally well on the 350D.
The 300D and 350D use the same plug.
I know DSLR Focus supports the 350D, I'm assuming Images Plus also supports the 350D.

I can only assume there's a conflict on your laptop.
Reply With Quote
  #23  
Old 30-09-2007, 03:03 PM
JohnG's Avatar
JohnG (John)
Looking Down From Above

JohnG is offline
 
Join Date: Dec 2005
Location: Cootamundra, NSW
Posts: 1,711
Do you have the latest Canon WIA driver installed, that is a requirement, not sure about EOS Utilities though.

Cheers

Last edited by JohnG; 30-09-2007 at 03:56 PM.
Reply With Quote
  #24  
Old 30-09-2007, 03:12 PM
iceman's Avatar
iceman (Mike)
Sir Post a Lot!

iceman is offline
 
Join Date: Sep 2004
Location: Gosford, NSW, Australia
Posts: 36,799
John, does your camera flash "Busy" all the time while it's connected?
Reply With Quote
  #25  
Old 30-09-2007, 03:15 PM
JohnG's Avatar
JohnG (John)
Looking Down From Above

JohnG is offline
 
Join Date: Dec 2005
Location: Cootamundra, NSW
Posts: 1,711
No Mike., just has the normal information on the screen.
Reply With Quote
  #26  
Old 30-09-2007, 03:16 PM
[1ponders]'s Avatar
[1ponders] (Paul)
Retired, damn no pension

[1ponders] is offline
 
Join Date: Nov 2004
Location: Obi Obi, Qld
Posts: 18,778
Mike do you have Canon remote capture installed? What setting is your camera dial set on?

If you don't have Canon Utilities installed it is unlikely you have remote capture installed. This is needed by any program that operates the camera, K3, DSLR Focus, Maxim DSLR etc
Reply With Quote
  #27  
Old 30-09-2007, 04:01 PM
iceman's Avatar
iceman (Mike)
Sir Post a Lot!

iceman is offline
 
Join Date: Sep 2004
Location: Gosford, NSW, Australia
Posts: 36,799
Quote:
Originally Posted by JohnG View Post
No Mike., just has the normal information on the screen.
hmm this could be a problem then? Mine says "Busy" all the time.

Quote:
Originally Posted by [1ponders] View Post
Mike do you have Canon remote capture installed? What setting is your camera dial set on?
No, I don't have it installed.
The dial is on "M". What should it be on?

Quote:
If you don't have Canon Utilities installed it is unlikely you have remote capture installed. This is needed by any program that operates the camera, K3, DSLR Focus, Maxim DSLR etc
Can I download remote capture? Or is it on the original CD's? (which I'd need to go and find!
Reply With Quote
  #28  
Old 30-09-2007, 04:08 PM
JohnG's Avatar
JohnG (John)
Looking Down From Above

JohnG is offline
 
Join Date: Dec 2005
Location: Cootamundra, NSW
Posts: 1,711
Mike, you can get the latest WIA driver and Remote Capture from the Canon website

http://www.canon.com.au/products/cam...y_support.aspx

Cheers
Reply With Quote
  #29  
Old 30-09-2007, 04:15 PM
[1ponders]'s Avatar
[1ponders] (Paul)
Retired, damn no pension

[1ponders] is offline
 
Join Date: Nov 2004
Location: Obi Obi, Qld
Posts: 18,778
M is right. I think not having remote capture installed is your problem.

It's all on the disk. I'd suggest installing everything in the utilities except zoom browser and Camera Window.
Reply With Quote
  #30  
Old 30-09-2007, 04:30 PM
iceman's Avatar
iceman (Mike)
Sir Post a Lot!

iceman is offline
 
Join Date: Sep 2004
Location: Gosford, NSW, Australia
Posts: 36,799
Installing now (found my CD).

Will let you know.

Cheers
Reply With Quote
  #31  
Old 30-09-2007, 07:52 PM
iceman's Avatar
iceman (Mike)
Sir Post a Lot!

iceman is offline
 
Join Date: Sep 2004
Location: Gosford, NSW, Australia
Posts: 36,799
SUCCESS!

Not only was the install of the software needed, but I also needed to set the "Communication" to "PC Connection" on the Camera itself!

All working now, thanks very much for your help!
Reply With Quote
  #32  
Old 30-09-2007, 07:53 PM
[1ponders]'s Avatar
[1ponders] (Paul)
Retired, damn no pension

[1ponders] is offline
 
Join Date: Nov 2004
Location: Obi Obi, Qld
Posts: 18,778
Quote:
Communication" to "PC Connection
forgot about that one
Reply With Quote
  #33  
Old 30-09-2007, 09:10 PM
RB's Avatar
RB (Andrew)
Moderator

RB is offline
 
Join Date: Aug 2005
Posts: 26,561
Reply With Quote
  #34  
Old 30-09-2007, 09:31 PM
iceman's Avatar
iceman (Mike)
Sir Post a Lot!

iceman is offline
 
Join Date: Sep 2004
Location: Gosford, NSW, Australia
Posts: 36,799
Well all going swimmingly now..

ImagesPlus is setup, remotely capturing 10x60s exposures of NGC253 - my first galaxy shot! I hope they turn out

I balanced the scope properly this time, so 60s unguided seems to be keeping the stars mostly round without trailing. So far so good.
Reply With Quote
  #35  
Old 30-09-2007, 10:03 PM
iceman's Avatar
iceman (Mike)
Sir Post a Lot!

iceman is offline
 
Join Date: Sep 2004
Location: Gosford, NSW, Australia
Posts: 36,799
Transparency is shocking! But I can see a galaxy

Finished taking the lights, taking some dark frames now. Of course I forgot to put the cap on the telescope for the first 1 and a half dark exposures
Reply With Quote
  #36  
Old 30-09-2007, 10:06 PM
[1ponders]'s Avatar
[1ponders] (Paul)
Retired, damn no pension

[1ponders] is offline
 
Join Date: Nov 2004
Location: Obi Obi, Qld
Posts: 18,778
Ah yes, my first galaxy. I remember it well. Centaurus A I believe it was...or was it M31 .....or maybe it was the SMC (does that count ) .....and somewhere in there I recall a widefield 253. Ah memories

Have a great time mate. After this you wont even consider going back to the "other side" of imaging
Reply With Quote
  #37  
Old 30-09-2007, 11:40 PM
h0ughy's Avatar
h0ughy (David)
Moderator

h0ughy is offline
 
Join Date: Apr 2005
Location: NEWCASTLE NSW Australia
Posts: 33,378
what a pile of info within this post!!! glad you are up and running Mike
Reply With Quote
  #38  
Old 05-10-2007, 10:31 PM
netwolf's Avatar
netwolf
Registered User

netwolf is offline
 
Join Date: Jan 2005
Posts: 2,949
Hi Mike, Can these cables be purchased locally?

Regards
Fahim
Reply With Quote
  #39  
Old 07-10-2007, 06:53 PM
iceman's Avatar
iceman (Mike)
Sir Post a Lot!

iceman is offline
 
Join Date: Sep 2004
Location: Gosford, NSW, Australia
Posts: 36,799
Hi Fahim

The USB cable comes with the camera. The long exposure one, I'm not sure. Probably best to start a new thread and ask.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 07:49 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement