Go Back   IceInSpace > Beginners Start Here > Beginners Talk
Register FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Rate Thread
  #1  
Old 01-01-2009, 09:06 AM
gel
Registered User

gel is offline
 
Join Date: Jan 2006
Location: MOSMAN
Posts: 84
polar alignment querie

my flat is westerly facing, no backyard, about a 4 metre frontage surrounded by larger buildings, i can only see south very very high up, can i Blind cheat my mount(eq6 arriving shortly) with a good guess,ie: aim it at say 45 degrees and a little to the left of octans
Reply With Quote
  #2  
Old 01-01-2009, 10:18 AM
Dennis
Dazzled by the Cosmos.

Dennis is offline
 
Join Date: May 2005
Location: Brisbane
Posts: 11,723
Hi Gel

Have a look at the azimuth and altitude jigs that I made for aligning in the daytime. The altitude “protractor” is on the 2nd page.

Using these jigs, I can get to between 1 and 2 degrees of the SCP.

Cheers

Dennis
Reply With Quote
  #3  
Old 01-01-2009, 11:55 AM
JohnG's Avatar
JohnG (John)
Looking Down From Above

JohnG is offline
 
Join Date: Dec 2005
Location: Cootamundra, NSW
Posts: 1,710
Hi Gel

Not to undermine Dennis's excellent solution, you may want to consider one of these for your elevation adjustment....

http://www.woodworksupplies.com.au/category116_1.htm

I use one of these whenever I move my field mount and have found that if you get your Lat and Long in digital format, you can adjust your elevation fairly accurately, infact accurate enough that you can do guided astrophotography without much of a hint of Field Rotation. Your azimuth still needs to be setup but that is not difficult.

I know of quite a number of people who use one of these in the field.

Cheers
Reply With Quote
  #4  
Old 01-01-2009, 01:30 PM
AlexN's Avatar
AlexN
Widefield wuss

AlexN is offline
 
Join Date: Mar 2008
Location: Caboolture, Australia
Posts: 6,858
John, I use one of those, I used to do it with an analogue inclinometer that I bought at bunnings for a whooping great $20.. with that i could get it close... with digital, its spot on... Then perform azimuth drift alignment and start imaging...

Alex.
Reply With Quote
  #5  
Old 01-01-2009, 02:17 PM
gel
Registered User

gel is offline
 
Join Date: Jan 2006
Location: MOSMAN
Posts: 84
thanks for the replies guys its getting to look like a favourable outcome might be achievable
Reply With Quote
  #6  
Old 01-01-2009, 05:25 PM
AlexN's Avatar
AlexN
Widefield wuss

AlexN is offline
 
Join Date: Mar 2008
Location: Caboolture, Australia
Posts: 6,858
Shouldnt be too much of a problem mate..
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 02:42 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Bintel
Advertisement