RMS and a GPD2
Have been imaging all night tonight (YAY, what a change!) and in between the 10 minute subs, I have been fiddling with PHD graphs etc.
My average RMS for a 10 minute sub is 0.07. RA is essentially flat, but Dec is making a LONG wavelength sinusoidal wave, which is causing this RMS I presume. Polar alignment was sub-minute for alt nd az, and LOW seconds at that, so the PA is VERY close.
Would this bring it down to Dec backlash? I have the Dec balanced camera heavy. I notice a small side-to-side movement of the Dec head when the mount is shut down - should I tighten this until it JUST binds ever so slightly WITHOUT causing too much strain on the dec motor?
It guided for 3 hours on one target without ever moving off centroid (variations in seeing only)
|