eyepiece projection for dannat

[skwinty (Steve)]

hi daniel
pic 1 shows from left to right
1 Nose piece
2 Adapter for 2" to 1.5" eyepiece adapter
3 2" to 1.5" adapter
4 barlow
5 Threaded clamp
6 Extension pieces
7 Threaded adapter
8 Canon t ring

Pic 2-5 show various stages of assembly.
Hope this helps
Regards
Steve

[dannat (Daniel)]

thanks heaps steve
daniel\PS I presume you have a 1.25" barlow s you are including the adapter in ypur setup - if I use a 2" I should not need it , is this correct?

[skwinty (Steve)]

hi daniel
if you use a 2" barlow then leave out the 2" to 1.5" adapter
regards
steve

[dannat (Daniel)]

Steve thanks for the pics, will go looking at the 2" barlows, and for a nosepiece as well
dan