Recently purchased off an IIS member as a bundle. Wanted to give OAG a shot BUT struggled to get focus through my imaging and guiding rigs simultaneously so moving back to guide scopes (never had an issue in the first place TBH with guiding).
The OAG was missing a few adapters but I've since purchased a 5mm spacer which is included .
Please note, one of the adapters is jammed with a 10mm spacer. If your setup requires this for backfocus then perfect, if not, you have another of those adapters (it goes camera side). You can likely get it off if you have the tools - I literally just tried with kitchen gloves.
Please see the image as that is what's included in the sale.
