[SOLD] Super cheap Bahtinov mask cut for you. Choose from MDF or Acrylic - Page 3

dpastern (Dave Pastern) · #41 29-09-2009, 09:44 PM

Mike - thanks for your help via PMs. I've sent you another PM just now with an order for 2 and some questions!

Cheers,

Dave

ozstockman (Mike) · #42 30-09-2009, 06:57 AM

Hi Graeme,

can you please resend it. I cannot see anything from you in my pm inbox.

cheers,

Mike

dpastern (Dave Pastern) · #43 07-10-2009, 12:23 AM

Mike - received my goodies today - very nice! Thank you!

Dave

DavidTrap (David) · #44 08-10-2009, 12:39 AM

Received mine today - hope they work as well as they look!!

Thanks
David T

Ghost_Returns (Richard) · #45 18-10-2009, 08:02 PM

Whooeee PM sent

ozstockman (Mike) · #46 02-11-2009, 01:34 PM

Hi guys,

I have added more details and a picture regarding all masks except the ones for refractors.

See my first post located at the top.

cheers,

Mike

AstroFlyer (Arek) · #47 07-11-2009, 02:14 PM

PM sent

keppar (Graham) · #48 14-11-2009, 12:06 PM

PM sent

AstroFlyer (Arek) · #49 14-11-2009, 12:56 PM

Another happy customer...

My mask arrived yesterday.

Thanks a lot Mike.

Arek

freespace · #50 24-11-2009, 01:04 AM

Got mine today. Cut to perfection.

Mike does fantastic work, very happy with my mask!

Cheers,
Steve

GeorgeC · #51 24-11-2009, 11:59 PM

In an earlier post there were comments that a Carey mask from 3mm acrylic was not so good and needed a thinner material. I have now done some experiments with my 10" reflector and 3mm acrylic and it is perfectly OK. Previous trials were with a 6" scope.
I suspect that some of my disappointing results were due to poor tracking. Have a look here http://www.btinternet.com/~gfcarey/careymaskten.htm
for some examples.

ozstockman (Mike) · #52 29-11-2009, 08:50 AM

Thanks George for letting us know about results with 3mm thick Carey mask.

I will try to cut one for myself and test it shortly.

Benno85 (Ben) · #53 08-12-2009, 04:22 PM

Mine arrived today for the ED80 - black acrylic. Another happy customer

PeterM · #54 08-12-2009, 07:51 PM

Hi Mike,
I sent you 2 pms a few weeks ago re ordering a 12inch mask for my LX200R with an Optec F7 reducer. Did you get these?

Thanks
Peter

ozstockman (Mike) · #55 11-12-2009, 05:09 PM

Hi Peter,

No, I didn't receive any pm from you. Please emil me to ozstockman at gmal dot com.

Cheers,

Mike

Phoenix (Steve) · #56 16-12-2009, 11:30 AM

PM sent

Thanks Mike.

OzRob (Rob) · #57 17-12-2009, 02:12 PM

I got mine and it looks very smart!!!

Phoenix (Steve) · #58 23-12-2009, 11:24 AM

Yet another happy customer - three masks arrived today. Wasn't expecting them until well after Christmas as we all deserve a break this time of year. Nice surprise. Perfect workmanship, with f/ratio engraved on each one.

Well done Mike - very much appreciated. Have a great Christmas.

Cheers
Steve

ozstockman (Mike) · #59 23-12-2009, 04:54 PM

Hi guys,

Thanks for your feedback.

Everybody who has ordered and paid recently should receive their masks this year. All orders have been already posted.

I am going on holidays till 2nd of January and might not be able to reply to your PMs. I will do it once I am back.

Merry Christmas and Happy New Year!

Cheers,

Mike

ozstockman (Mike) · #60 27-02-2010, 09:31 AM

I am still cutting masks out if anybody is interested.