[NOT REQUIRED] Losmandy GM8 Digital Drive board

[Ryderscope (Rodney)]

This is probably a long shot but I am going to give it a go.

It seems that I have damaged my digital drive controller board for my GM8. It no longer works (doesn't drive the stepper motors at all). My analysis leads to a dead controller board. The code on the front of my unit says model 492.

Does anyone have a GM8 digital drive controller board lurking about that they could part with?

[phomer (Paul)]

Originally Posted by Ryderscope

This is probably a long shot but I am going to give it a go.

It seems that I have damaged my digital drive controller board for my GM8. It no longer works (doesn't drive the stepper motors at all). My analysis leads to a dead controller board. The code on the front of my unit says model 492.

Does anyone have a GM8 digital drive controller board lurking about that they could part with?

I assume you aware that this can be obtained new from Losmandy.

http://www.losmandy.com/replacement.html

Regards

Paul

[Poita (Peter)]

If you want to send me your board I could see if it is repairable.

[Ryderscope (Rodney)]

Thanks for the responses all. I have actually ordered a replacement from Losmandy I will contact Peter via PM to discsuss repair option as well.