Synscan Question

[solissydney (Ken)]

First time user of Synscan on NQ6 Pro.
In 'stand alone' mode all buttons works.
With scope in "any position" and hooked up, only slewing works.
Do I need to polar align a s o first to make all buttons work?
Ken

[CarlJoseph (Carl)]

You don't need to polar align for the handset to work with your mount. I founds it a little tricky to use a first. You basically need to hit the "esc" key to get to the other menu options.

[solissydney (Ken)]

Thanks Carl.
Tried it all.
Shall persevere
Regards
Ken

[solissydney (Ken)]

So, the solution to my problem was simply that I had to press the enter button twice.
Simple, but unusual.

[CarlJoseph (Carl)]

Glad you got it worked out! It's not the most intuitive device to use unfortunately, but you do get the hang of it after a few nights.

[solissydney (Ken)]

Being used to Argo Navis I found it quite easy. Except for the initial double click of the Enter button.

I am impressed with the usage of the numbers on each buttons, quick and easy.
ken