Wanted EQ6 dovetail & plate

[33South (Chris)]

At last my mounting rings are on their way from Parallax.

So what Im after buying is a mounting/dovetail plate similar to the offcut Striker had here but a bit larger say 6"wide x 12" (152mm x 304mm) could compromise on the size.

http://www.iceinspace.com.au/forum/s...ead.php?t=6394

"Mick modified EQ6 dovetail plate....this is what's left off Mick's plate as it was too long so I cut to my length....If you have an EQ6 mount and what to put a nice flat based rings ontop..this is the plate you need. Plate length is 173mm and 100mm wide."

Any offers or even just pointing me to a local supplier would be appreciated.

Thanks
Chris

[slice of heaven]

Have you contacted Mick Pinner?