Universal Paracorr extension ring info needed

[richardo (Rich)]

Hi all,
I need some information on the exact length the TRG-1072 will be when screwed into the universal paracorr? This is so I can determine the exact spacer I need.

From the information, it tells nothing if it fits flush or whether it adds a bit of length to the train.

I need 12-13mm of spacing to reach the desired 56mm to my ccd chip face (this includes FW).
So what I can figure is that with the TLC-0500" (12.5mm) spacer and the TRG- 1072 T ring, (if the latter doesn't add any length) this would be what I need???
BUT, if the TRG- 1072 T ring adds slightly more length, then I would have to go for the shorter TLB-0375" (9.5mm) extension ring???

Please, any one with any qualified info on the exact measurements would be much appreciated!

All the best
Rich

[peter_4059 (Peter)]

Rich

My IS-T adaptor adds about 1.7 mm length.

Peter

[richardo (Rich)]

Originally Posted by peter_4059

Rich

My IS-T adaptor adds about 1.7 mm length.

Peter

Peter, excuse my ignorance, but is the Televue IS-T adapter the same as the TRG-1072 adapter??

Thanks
Rich

[peter_4059 (Peter)]

Yes

[richardo (Rich)]

Thanks for that!

Rich