Go Back   IceInSpace > Equipment > Software and Computers
Register FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Rate Thread
  #1  
Old 18-11-2005, 11:11 PM
davidpretorius's Avatar
davidpretorius
lots of eyes on you!

davidpretorius is offline
 
Join Date: Jun 2005
Location: Launceston Tasmania
Posts: 7,381
Snake Valley Part V (Registax & more)

Ok,

I have finally put together a rough article for Registax and other planet processing tips. It has raw format, easy registax, hard registax, astra image, ppm centre & bink and smacker.

http://precons.com/iis/Articles/imag...otracking.aspx

Please have a read through. It is aimed at the noobie and I will put it forward to mike for consideration as an article.

Comments, spelling mistakes etc please feedback. I would like for Noobies to have a good reference for imaging built around our forum experiences

Thanks All

Dave P
Reply With Quote
  #2  
Old 18-11-2005, 11:28 PM
davidpretorius's Avatar
davidpretorius
lots of eyes on you!

davidpretorius is offline
 
Join Date: Jun 2005
Location: Launceston Tasmania
Posts: 7,381
  • One thing i forgot is the screen shots for the toucam settings, I will add tomorrow!
  • And the rgb histo stretch in wavelets
  • anything else???
Reply With Quote
  #3  
Old 19-11-2005, 08:09 AM
davidpretorius's Avatar
davidpretorius
lots of eyes on you!

davidpretorius is offline
 
Join Date: Jun 2005
Location: Launceston Tasmania
Posts: 7,381
Also the links to the websites where you can download the software will be added
Reply With Quote
  #4  
Old 19-11-2005, 09:40 AM
bird (Anthony Wesley)
Cyberdemon

bird is offline
 
Join Date: Jan 2005
Location: Rubyvale QLD
Posts: 2,627
Good article DP. A couple of comments:

- I've loaded about 6000 BMP files into registax using drag n drop without it crashing, I think the number is limited mostly by the buffer that Windows allocated to hold filenames during a drag n drop, it's a 64k buffer as far as I know, maybe that's fixed under winxp? Anyway, you should be able to load a lot more than 300 or so.

- There's a way in Windows to add "Start command prompt here" into the Windows Explorer so you can right-click on a directory and start a cmd prompt in that directory. You might be able to setup a shortcut for ppmcentre to do the same thing so that the user doesn't need to see the command prompt at all.

- The reason your images brighten up in AA is that it automatically applies a histogram stretch on greyscale images, i.e. the brightest pixel in your image is mapped to white. You can always use the "scale" dialog later on to reduce the brightness if you like, and no information is lost in this process.

- In the RGB combine, I'd recommend zooming in a couple of steps and panning around to see if the colour planes are lined up. Sometimes a shift of just 1 pixel here or there can make a noticeable difference but they can be hard to see if you stay at the 1x zoom.

- Might be worth suggesting that the "best" time for imaging a planet is just a couple of months after inferior conjunction when it's high up in the pre-dawn sky, say around 4am. If people try and image at that time of night then a lot of the hidden problems with temperature etc can be minimised without them having to really know much about it.

I have heard a lot of people comment that they wait until the planet is high in the sky at around 9pm (i.e. after opposition) before they try imaging it, just because it's more convenient to set up at that time of night - BUT they usually add that they couldn't see anything at all and were feeling like it was a waste of time. 8" or larger newts/sct's will most likely be working very badly at that time of night, especially since most people will not allocate the leadup time to let the scope cool down.

regards, Bird
Reply With Quote
  #5  
Old 19-11-2005, 09:50 AM
davidpretorius's Avatar
davidpretorius
lots of eyes on you!

davidpretorius is offline
 
Join Date: Jun 2005
Location: Launceston Tasmania
Posts: 7,381
thanks a heap bird, i will digest and amend my article with your permission of course and with due references
Reply With Quote
  #6  
Old 19-11-2005, 02:51 PM
asimov's Avatar
asimov (John)
Planet photographer

asimov is offline
 
Join Date: May 2005
Location: Bundaberg
Posts: 8,819
Great Davo! I'm collecting all registax info such as this for my own use, & saving it on my computer. thanks mate.
Reply With Quote
  #7  
Old 30-11-2005, 10:30 PM
danielsun's Avatar
danielsun
Canon collector

danielsun is offline
 
Join Date: Oct 2005
Location: Taylors Lakes Melb
Posts: 1,965
Thanks Dave!! I am totally new at this and have been doing a lot of reading and trying to make sense of it all. thats a great effort from you to put that together, i think its just what some one like me needs to get me started so well done!!!
Reply With Quote
  #8  
Old 01-12-2005, 08:15 AM
davidpretorius's Avatar
davidpretorius
lots of eyes on you!

davidpretorius is offline
 
Join Date: Jun 2005
Location: Launceston Tasmania
Posts: 7,381
Quote:
Originally Posted by danielsun
Thanks Dave!! I am totally new at this and have been doing a lot of reading and trying to make sense of it all. thats a great effort from you to put that together, i think its just what some one like me needs to get me started so well done!!!
the biggest thing is to try some different settings yourself. get the general idea from what has been written and then experiment and then post the results for all to see and analyse.

that way, we do not get too set in our ways and your fresh ideas as a noobie helps all of us. iceman does slightly different things to bird to rumples to anthony. all have different setups equipment wise.

thankyou for your thanks!
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 10:29 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement