side by side telescope clamps/adapters.

[Gerald Sargent]

Some one in Australia makes a very rhobust side by side
system that fits Vixen/Skywatcher mounts Can any one
advise who this is. I believe he is in Adelaide. Gerald.

[wasyoungonce (Brendan)]

Maybe you are thinking of Star Stuff?

http://www.starstuff.com.au/eqsbskits.html

Expensive but good quality.

[peter_4059 (Peter)]

This is what you saw last night Gerald...

http://www.telescopes-astronomy.com.au/

about half way down the page.

Regards,

Peter

[Alchemy (Clive)]

got a couple of those that im not using sitting in the observatory.... not wanted , give me couple hours and i will put a pic of what ive got.


clive.

[Alchemy (Clive)]

back again.

the pics are what i have available.

2x heavy duty side by side plates, size 78mm x78mm
2x small dovetail plates. 150mm long

i cant sell the heavy duty dovetail plate as its on the scope.

it has four holes tapped into it to allow the side plates to be rotated 90 deg

it would be fine for two lightweight scopes if you look closely the two small dovetail plates have a flat section on the side where the bolts clamp rather than the all the way down angle on normal dovetails.

you can check out the website and confirm that what i have is whats listed. if you want them you can have them at 60% cost plus postage. ( wont separate as they arent usefull apart)

thers a 50 cent peice for scale in the pic.