OK I've just purchased a Telrad for my 10" Equatorial mounted newt.
Now where do I mount it?
A- Do away with the finder scope, and mount it in it's place
B- Move the finder scope and mount it between the focuser and the finder
C- Mount it on the other side of the focuser for the Finder scope
D- Mount it on top of the rings where you would piggy back another scope
E- All of the above.
If practcaible I would like to retain both the Telrad and the finder scope as each has it's niche.
Im like you though i would mount it in a easily viewable position near the finderscope, so you can duck between them both.
Once again best thing to do is hook up with a club, and see what others have done. Telerads are quite common so you should have a bit of variety to view.
I was at a club meeting on saturday and everybody seemed to have put their telerad right beside the finderscope. though im a bit sceptical, with a dob you have to tilt your head over quite a fair bit to look though the finderscope, i can imagine this would be great for giving yourself a neck ache if your going for the telerad which is even further over.
I think i might make a bracket that goes under the finderscope dovetail bracket and pops out either above or just to the side so i can see it. I guess my requirements are that the scope will be used for imaging so there will be a piggy back arrangement happening so it has to clear 80 ed or something similar!
