Would just like to hear some of the Lightbridge owners tips and ideas on mods for their scopes.
I'm considering getting a set of Bob's Knobs, painting the rings of the OTA black, as well as the trusses, or at least covering them with black foam.
Also what's the opinion on shrouds for truss dobs?
I'm a self confessed fix it till it's broke type, but seriously would just like to get the most out of my scope and am sort of using it as a blackboard before I move on to the 16".
The collimation mod is a must do IMO. Look into astronomyshoppe.com though and you may find the kit cheaper. All the other mods will provide differing returns but this is probably the first you'd do.
A more durable finish on the rings would be to powder coat flat black, I think this only cost about $40 for the four. I think I'll do the trusses too.
Shrouds give a bit of peace of mind in case something is dropped but also helps with dew (as well as keeping out the light). I always use mine.
The inside of the tubes aren't real black either so might like to flock or repaint here too.
If you use big EPs or big barlows etc you may need to add some counter weights.
There are other mods which I can't think of at the moment but I'm others like the ever helpful astronut who know what can be done
Cheers
Last edited by JethroB76; 19-06-2007 at 06:51 PM.
Reason: its a secret
The collimation mod is a must do IMO. Look into astronomyshoppe.com though and you may find the kit cheaper. All the other mods will provide differing returns but this is probably the first you'd do.
A more durable finish on the rings would be to powder coat flat black, I think this only cost about $40 for the four. I think I'll do the trusses too.
Collimation is a must. Bintel sell a set of Bob's knobs & springs for $96.00
