Originally purchased for my 11" EdgeHD, it is also compatible with the 9.25" and 14" models. In fact it works with any flat field SCT with a 3.25 inch rear connector.
I have included the universal 55mm back-focus adaptor as shown.
It has only been used a couple of times and it in pristine condition.
Description
The Optec Lepus 0.62X is a 4-element focal reducer works with Schmidt-Cassegrain telescopes including the Meade ACF and the Celestron EdgeHD. The Lepus provides a 0.62X reduction of the telescope’s effective focal length. It works well with most mid-size CCD cameras and Digital SLR cameras having sensor diagonals up to 28mm.
The Lepus 0.62X is optimized for 100mm of distance between the last lens surface and the image plane. Measured from the reducer flange, this distance works out to 105mm. Assuming a native focal ratio of f/10, the Lepus will reduce the effective focal ratio to approximately f/6.2. The Lepus provides a fully unvignetted image 22mm in diameter but will provide well-corrected images out to 28mm with a small amount of light fall-off.
Selling for $350 plus postage.
Further information can be found here:
https://optecinc.us/collections/tele...products/19411
