Celestron handbox up date

[I.C.D (Ian)]

Hi All I am trying to update my Celestron mount and hand controller ,I have down loaded the CFM software connected the PC to the hand controller and I get this message (CFM detected a serial ports on your PC but found no device attached to them).My computer only has usb type c ,have I got the wrong software ,

[alw50 (Andrew)]

Your USB-C connection is fine. The USB connector in the handset actually connects inside the handset to a USB to serial converter, made by Prolific.

The problem probably is that you don't have a driver installed for it. To fix that, you can download a driver for its PL2303 chipset.

For example, from this link:
https://www.prolific.com.tw/US/ShowP...id=225&pcid=41

Regards, Andrew

[I.C.D (Ian)]

Thanks Andrew finally got both updated all working fine