ICEINSPACE
Moon Phase
CURRENT MOON
Waxing Gibbous 97.9%
|
|

03-01-2019, 06:46 PM
|
Registered User
|
|
Join Date: Dec 2017
Location: Sydney and South Coast NSW
Posts: 6,597
|
|
DSLR in camera noise reduction and High ISO speed noise reduction
It pays to check your DSLR camera settings every few months as I have been using in camera noise reduction and high ISO speed noise reduction without even realising it for about a year ( silly me )
When capturing my images with BYEOS I’ve been watching the exposure time (say a 2 minute sub) count down and then a 2 minute noise reduction count down to zero and not even registering that I’m waisting 100% of my time on each sub as I have been taking my darks at the end of the session
The penny just dropped when I had another read of Jerry Lodriguss e-book on DSLR Astrophotography.
Gee no wonder I have been getting to bed really late on an average imaging session
Ive been using a 2 second pause and delay but might increase this to 5 seconds during the summer months to give the sensor a bit of cool down time
Cheers
|

03-01-2019, 06:54 PM
|
 |
Gravity does not Suck
|
|
Join Date: Mar 2005
Location: Tabulam
Posts: 17,003
|
|
On the bright side we get a laugh at your expense☺.
At least you found out.
I have thought the camera was clicking away dling 30 second captures only to find I had a 30 minute blown out exposure when Iooked☺
And one run with the focuser mask still in place☺.
Alex
|

03-01-2019, 06:55 PM
|
 |
Gravity does not Suck
|
|
Join Date: Mar 2005
Location: Tabulam
Posts: 17,003
|
|
Duplicate post deleted
Alex
|

03-01-2019, 06:57 PM
|
Registered User
|
|
Join Date: Jun 2013
Location: Lake Macquarie
Posts: 7,121
|
|
Turning off all that processor hungry activity will generate less heat. The sensor itself does not produce much heat at all, it is the processor, or multiple processors in many cameras, running all these other activities that really heat up the inside of a camera, and thus the sensor by association and location. The battery is another big heat generator, if you can find a battery eliminator for your camera, buy one; this helps reduce internal heat.
|

03-01-2019, 07:13 PM
|
 |
Registered User
|
|
Join Date: Feb 2006
Location: Sydney
Posts: 18,164
|
|
For what its worth I find the LENR (Long exposure noise reduction) is best left on for nightscapes with a Canon EOS R. It improves contrast and removes background colour blotching and is time well spent.
For deep sky work though if you are using darks then yes best turn it off.
So its not a cut and dry always turn it off situation.
Greg.
|

03-01-2019, 07:20 PM
|
Registered User
|
|
Join Date: Dec 2017
Location: Sydney and South Coast NSW
Posts: 6,597
|
|
Alex
It’s good to have a laugh and not takes things too serious. I’m wondering what else I’m doing wrong, although my images are ok I suppose I must be doing something’s right
Glen
Thanks for the technical heads up on the heat generated within the camera
I have a remote power supply to my camera , so no internal battery, any heat dissipated from the power supply is below the mount and not inside the camera
I suppose that helps a bit
Cheers
|

04-01-2019, 08:01 AM
|
 |
Gravity does not Suck
|
|
Join Date: Mar 2005
Location: Tabulam
Posts: 17,003
|
|
Martin you are doing great images so yes you are doing things right.
Alex
|

08-01-2019, 12:33 PM
|
 |
Registered User
|
|
Join Date: Feb 2011
Location: Kilmore, Australia
Posts: 3,362
|
|
Even worse, the darks you are shooting at the end would not actually be doing you any good. They will be a dark frame taken with the shutter open, with a second dark frame with the shutter closed subtracted from them. Been there, done that.
The biggest impact of using the in camera darks is the blowout in imaging time where a 30 second sub takes about 65 seconds to complete instead of about 35.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +10. The time is now 01:45 PM.
|
|