Like new condition, 8x8x8 inch build size, fully assembled, hardly used.
Everything works fine but need to get a piece of glass or Kapton tape to help prints stick to the heat bed. Printrbot sells the tape in the right size for about $10 on their website or you can purchase rolls of it on ebay fairly cheap. Comes with a nearly full 1lb (.45kg) roll of green abs filament.
Cost $900 new unassembled, took a few days to assemble. Printrbot plus now costs $1,299 U.S., but that is a bit bigger at 10x10x10 build size plus you would still need to add for postage on top of that.
Selling as I have lost interest and it just gathers dust now.
Would be tricky to post but can deliver to Newcastle area or pick-up in Beresfield.
If you really would like it posted we might be able to organise something but not sure how much that will cost. Probably a fair bit but the price is already low so it might still be worth while to look into.
Can pay on pick-up or if I deliver. If postage is organised can take either paypal or direct bank deposit.
Cheers,
Kris.
Last edited by ed9428; 09-06-2014 at 09:33 AM.
Reason: Added photo
Borrowed a piece of glass from a photo frame and printed out a small robot for an example. (See add)
He is 28mm tall. Printer could still benefit from a little calibration but as I have said I have lost interest.
