ICEINSPACE
Moon Phase
CURRENT MOON
Waning Crescent 10.4%
|
|

08-07-2013, 08:05 AM
|
 |
Novichok test rabbit
|
|
Join Date: Aug 2012
Location: Somewhere in the cosmos...
Posts: 10,389
|
|
How to kill yourself without trying
I nearly did.
Needed to clean the outdoor tiled entertainment area before the big move out. There are some tannin and rust stains on it, and seeing the tiles have an antislip coating, these are a pain to remove.
So, the backyard dodgy chemist in me lays downs some hydrochloric acid and start scrubbing with a stiff broom.
Well, I expect the HCl is reacting nicely with the calcium carbonate in the tile grout, and I am slowly enshrouded in chlorine or some variant thereof, considering the airflow in this area is nill at the best of times. WHOA!!!
Now, I am also assuming this concoction of halides is turning into hypochlorous acid or similar in my trachea, ripping mucousal membranes assunder, as in no time I am hacking up and vomiting. I cannot get away from it fast enough, but realise I HAVE to return to wash the bloody thing off and stop it from poisoning the known universe! I stood back with the hose a LONG way away and with a towel wrapped around my head.
For the next 12 hours I had rales and wheezes, continual spitting as my mucous membranes repaired, and a pain in my right lung, which only by the sheer luck of the Irish did NOT turn into a pulmonary oedema! I ALMOST rang 000, but didn't, and my wife watched me all night.
And I missed some good astronomy.
I had done this before, SUCCESSFULLY, but for some odd reason this one went awry - new brand of HCl (not Diggers as usual, got the Bondall one) and just bad luck and stupidity. Time will tell what damage was done, but for the second time in my life I really felt I would not make it through the night.
|

08-07-2013, 08:18 AM
|
 |
Professional Nerd
|
|
Join Date: Nov 2011
Location: Strathalbyn, SA
Posts: 979
|
|
whoa - not cool man. I get asthma sometime - struggling to catch a breath can be frightening I know.
Maybe worth going to see the doc in the next day or so to get checked out, esp if you don't feel better soon. You don't want a lung infection
|

08-07-2013, 08:22 AM
|
Registered User
|
|
Join Date: Feb 2009
Location: Sydney
Posts: 1,217
|
|
Lewis
You should go to a doctor and will probably need a few scans as there are quite a few things that can wrong from such an experience wherein you might feel okay at the moment but may manifest later on - especially if you are planing travel in a plane in the not too distant future.
|

08-07-2013, 08:53 AM
|
 |
Novichok test rabbit
|
|
Join Date: Aug 2012
Location: Somewhere in the cosmos...
Posts: 10,389
|
|
Already been, and they are monitoring. Lots of tests done. Lung function seems normal.
I still have muscle pain in my chest from all the violent muscle contractions from the coughing and vomiting.
Nasty shiat!
Next time, I will use the proper tile and grout cleaner  Or maybe caustic soda (I know how that reacts)
|

08-07-2013, 08:59 AM
|
 |
amateur
|
|
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 7,107
|
|
I inhaled HCl fumes (but only briefly) while etching my own printed circuit boards in the past (was using the mix of H2O2 and HCl - very fast method, eats almost anything, even stainless steel)..
It was a terrible experience..
|

08-07-2013, 10:13 AM
|
Politically incorrect.
|
|
Join Date: Apr 2009
Location: Tasmania (South end)
Posts: 2,315
|
|
Quote:
Originally Posted by Profiler
Lewis
You should go to a doctor and will probably need a few scans as there are quite a few things that can wrong from such an experience wherein you might feel okay at the moment but may manifest later on - especially if you are planing travel in a plane in the not too distant future.
|
I teach chemistry. Get your bum to a doctor.
|

08-07-2013, 10:21 AM
|
Life is looking up!
|
|
Join Date: Sep 2010
Posts: 2,017
|
|
Lewis, you should seek medical advice immediately, or at the very least ring the Poisons advice section in your telephone emergency numbers, for advice.
I am surprised that, knowing the chemical reactions of these products so well, that many people fail to consider getting the right respirator mask and the correct filter. But to be fair, I suppose having worked in the safety industry, as a PPE and signage auditor, I know about such things.
This is a cautionary tale for others:
When I recently bought Hydrochloric Acid from Bunnings, I asked for the Material Safety Data Sheet (MSDS). To my utter surprise they could not easily produce one on request, and by law, they have to have an MSDS readily available for anything that contains any type of chemical. And this goes for your local supermarkets as well. So many do not even know what an MSDS is.
I told Bunnings that if they cannot produce one I will have to report this to Worksafe, as is required under WA legislation under the General Duty of Care. They eventually did produce an MSDS which they, apparently had to be emailed to them, whilst I waited about 20 minutes.
The MSDS should ALWAYS be consulted when using hazardous chemicals, as it gives all the details needed to understand how to use these chemicals SAFELY and the hazards associated with using such chemicals. ALWAYS refer to these MSDS and following the rquirements for their use.
The MSDS and its recommendations are for YOUR personal safety, as this incident with Lewis clearly demonstrates, and should ALWAYS be consulted before use.
Hope you are OK Lewis.
Cheers Peter
|

08-07-2013, 10:34 AM
|
Politically incorrect.
|
|
Join Date: Apr 2009
Location: Tasmania (South end)
Posts: 2,315
|
|
One seta lungs
Quote:
Originally Posted by LewisM
Next time, I will use the proper tile and grout cleaner  Or maybe caustic soda (I know how that reacts)
|
Its not that simple. Concentrated inhalation of anything can do major damage to your lungs. Caustic Soda can also be quite lethal.
If the area is not well ventilated, do a small section and get the hell out of there. Also pick a windy day; the turbulence may help.
|

08-07-2013, 12:11 PM
|
Registered User
|
|
Join Date: Aug 2012
Location: Heathmere 3305
Posts: 162
|
|
hey Lewis,
no NEXT time,
get the contractor in, it would be cheaper,
regards,
Peter.
|

08-07-2013, 01:48 PM
|
 |
Registered User
|
|
Join Date: Aug 2005
Location: Melbourne
Posts: 1,696
|
|
Quote:
Originally Posted by Stardrifter_WA
Lewis, you should seek medical advice immediately, or at the very least ring the Poisons advice section in your telephone emergency numbers, for advice.
I am surprised that, knowing the chemical reactions of these products so well, that many people fail to consider getting the right respirator mask and the correct filter. But to be fair, I suppose having worked in the safety industry, as a PPE and signage auditor, I know about such things.
This is a cautionary tale for others:
When I recently bought Hydrochloric Acid from Bunnings, I asked for the Material Safety Data Sheet (MSDS). To my utter surprise they could not easily produce one on request, and by law, they have to have an MSDS readily available for anything that contains any type of chemical. And this goes for your local supermarkets as well. So many do not even know what an MSDS is.
I told Bunnings that if they cannot produce one I will have to report this to Worksafe, as is required under WA legislation under the General Duty of Care. They eventually did produce an MSDS which they, apparently had to be emailed to them, whilst I waited about 20 minutes.
The MSDS should ALWAYS be consulted when using hazardous chemicals, as it gives all the details needed to understand how to use these chemicals SAFELY and the hazards associated with using such chemicals. ALWAYS refer to these MSDS and following the rquirements for their use.
The MSDS and its recommendations are for YOUR personal safety, as this incident with Lewis clearly demonstrates, and should ALWAYS be consulted before use.
Hope you are OK Lewis.
Cheers Peter
|
Sorry to pick Peter, they're just called SDS now. They are available for all products sold in Australian retail outlets from the manufacturer, usually their website, so a couple of minutes on the internet should be enough to find one.
But ...
The information available in one of these things is usually too much for laypeople. For your reading pleasure I've attached the one for HCl from the Diggers HCl. There's a lot of information in it, just mostly useless.
People are FAR better off just reading the bottle, there are clear instructions for the type of PPE that people should use.
As for this particular case, I'm pretty sure that Lewis has generated Chlorine, probably some left over hypochlorite from some bleach in the grout, add HCl, hey presto, Chlorine gas.
Luckily the effects of Chlorine gas exposure are mostly repairable, unless you get a really big lung full, in which a pulmonary oedema is a distinct possibility.
I'm not a fan of (M)SDSs I use some very nasty chemicals every work day, the SDS are in the lab for legal compliance, no one looks at them unless we are checking to see if they are in date.
Cheers
Stuart
|

08-07-2013, 01:59 PM
|
 |
Novichok test rabbit
|
|
Join Date: Aug 2012
Location: Somewhere in the cosmos...
Posts: 10,389
|
|
I think there may have been residual sodium hypochlorite from when I last bleached the tiles. Voila, instant chlorine generator.
Got another quack appointment in 20 minutes, see how things are. All seems repairing very well. Thankfully, never did have burning eyes etc, so escaped that nastiness.
My great grandfather was gassed in WW1 (I know, mustard gas is sulphur and chlorine, but kinda similar) and suffered for the rest of his life with pulmonary problems, succumbing to pneumonia after WW2. I can imagine now just how wretched, inhumane a way to die it was!
|

08-07-2013, 02:10 PM
|
Registered User
|
|
Join Date: Aug 2006
Location: Western Australia
Posts: 8,278
|
|
As we all do when using any potentially dangerous chemical wear a good quality air filter mask and safety glasses
|

08-07-2013, 02:26 PM
|
 |
Registered User
|
|
Join Date: Aug 2005
Location: Melbourne
Posts: 1,696
|
|
Quote:
Originally Posted by TrevorW
As we all do when using any potentially dangerous chemical wear a good quality air filter mask and safety glasses 
|
Just make sure the filter will filter out the bad stuff. Chlorine gas will go straight through most commercial respirator cartridges. So wearing one is next to useless, in fact may be harmful as you have a false sense of security.
Most cartridges sold in Bunnings and the like are good for organic compounds only (paint fumes etc), most will not stop HCl gas or chlorine. Read the instructions. If in doubt ask someone, though I'm not sure the Bunnings people will know. Don't forget to change the cartridges out as well if you're working for extended periods of time as well. Also once opened to the atmosphere, they lose their effectiveness, so once you're finished throw the cartridges away so you're not tempted to reuse them.
Cheers
Stuart
|

08-07-2013, 02:34 PM
|
 |
Registered User
|
|
Join Date: Aug 2005
Location: Melbourne
Posts: 1,696
|
|
Quote:
Originally Posted by LewisM
My great grandfather was gassed in WW1 (I know, mustard gas is sulphur and chlorine, but kinda similar) and suffered for the rest of his life with pulmonary problems, succumbing to pneumonia after WW2. I can imagine now just how wretched, inhumane a way to die it was!
|
Mustard gas is not that similar to chlorine actually. It's also not a gas at normal temperatures. Respiratory effects of mustard exposure are usually reversible, unless the lungs are heavily scarred. From the sounds of things you GGF was probably exposed to phosgene, which had similar effects, but the effects were more long lasting.
Cheers
Stuart
|

08-07-2013, 04:45 PM
|
 |
Novichok test rabbit
|
|
Join Date: Aug 2012
Location: Somewhere in the cosmos...
Posts: 10,389
|
|
Had a chest Xray today, and all clear - no damage, no oedema. Seems the pain is more diaphragm and pectoralis muscles from the violent convulsive coughing and vomiting.
Situation normal, back to work
|

08-07-2013, 05:42 PM
|
Registered User
|
|
Join Date: Feb 2009
Location: Sydney
Posts: 1,217
|
|
Lewis
I am happy to hear this result but it may be worthwhile having another X-Ray or CT in about another 4 weeks time.
|

08-07-2013, 07:06 PM
|
Life is looking up!
|
|
Join Date: Sep 2010
Posts: 2,017
|
|
Quote:
Originally Posted by rat156
Sorry to pick Peter, they're just called SDS now. They are available for all products sold in Australian retail outlets from the manufacturer, usually their website, so a couple of minutes on the internet should be enough to find one.
But ...
The information available in one of these things is usually too much for laypeople. For your reading pleasure I've attached the one for HCl from the Diggers HCl. There's a lot of information in it, just mostly useless.
People are FAR better off just reading the bottle, there are clear instructions for the type of PPE that people should use.
As for this particular case, I'm pretty sure that Lewis has generated Chlorine, probably some left over hypochlorite from some bleach in the grout, add HCl, hey presto, Chlorine gas.
Luckily the effects of Chlorine gas exposure are mostly repairable, unless you get a really big lung full, in which a pulmonary oedema is a distinct possibility.
I'm not a fan of (M)SDSs I use some very nasty chemicals every work day, the SDS are in the lab for legal compliance, no one looks at them unless we are checking to see if they are in date.
Cheers
Stuart
|
Hi Stuart,
Yes, I totally agree.
You are correct that they are now known as SDS by Worksafe Australia, however, they are also know as PSDS (P being for Product), as well MSDS (still in common use), depending on point of origin, it seems. But that is mere semantics anyway.
Yes, these safety data sheets can be technical, however, I totally disagree that they are useless for the layperson, as you state, as the pertinent section on use of Personal Protect Equipment (PPE) and the hazards associated are VERY relevant to anyone using chemicals of any nature. Labels are well and good, but often hard to read or do not contain all the necessary info.
But, I do agree that not all of the SDS available are that informative either, some a very lacking whilst others are too detailed. I only know that I ALWAYS refer to them, as to have some information is better than none. To advocate that they are just useless is dangerous, or just careless. After all, unless we are chemical engineers, how else will we know. The only section I personally look at, these days, on an SDS (MSDS) are its hazards and appropriate PPE, not the scientific data, which most people would not understand, in that I do agree.
Furthermore, I do agree that the SDS can be useless too. I know that using Diphenylmethane Diisocyanate (MDI) requires an air-line respirator system, under Austrlian legislation, however, the MSDS did not state that. I prevented the possible deaths of two people who were going to use MDI within a confined space without the use of airline and were going to use a particle filter respirator instead. Fortunately, at the time, I had to understand legislative requirements. Using chemicals in confined spaces is dangerous any time.
Many years ago, it was through the use of an MSDS that I discovered that using 'methyl ethyl ketone' (commonly known as MEK) was really nasty stuff. We changed the process to eliminate the use of this solvent altogether and introduced steam baths. It was a great solution and was much more economical in the long run anyway, not to forget that it is environmentally friendly too.
I understand that you use many dangerous chemicals, as it is part of your job. The average person doesn't have a hope to gain that level of understanding and that is where an SDS is most useful. After all, we can't afford to pay an expert to advise us each time we use a new chemical.
Cheers Peter
Last edited by Stardrifter_WA; 08-07-2013 at 08:23 PM.
|

08-07-2013, 07:12 PM
|
Life is looking up!
|
|
Join Date: Sep 2010
Posts: 2,017
|
|
Quote:
Originally Posted by LewisM
Had a chest Xray today, and all clear - no damage, no oedema. Seems the pain is more diaphragm and pectoralis muscles from the violent convulsive coughing and vomiting.
Situation normal, back to work 
|
Good to hear Lewis, you were lucky.
Cheers Peter
|

08-07-2013, 09:07 PM
|
 |
Teknition
|
|
Join Date: Feb 2009
Location: Brisbane Australia
Posts: 1,721
|
|
Hi Lewis,
A lesson learnt the hard way. However I expect it to be learnt well.
On MSDS's, : Years ago I was working in the pest control industry. I introduced rodenticides into ceiling cavities.
I made the mistake of sometimes giving a copy of the MSDS to the customer. The customer with their infinite wisdom, knowledge and reading skills determine that the product was an explosive substance. "How dare you put an explosive in my ceiling?"
Just because the MSDS mentions the product's explosive properties (which is almost nil) the "highly intelligent" customer determines it is highly dangerous.
Also those customers did not own any telescopes.  But there were some astrology magazines about.
Cheers
|

09-07-2013, 12:41 AM
|
 |
Registered User
|
|
Join Date: Aug 2005
Location: Melbourne
Posts: 1,696
|
|
Quote:
Originally Posted by Stardrifter_WA
Hi Stuart,
Snip
Yes, these safety data sheets can be technical, however, I totally disagree that they are useless for the layperson, as you state, as the pertinent section on use of Personal Protect Equipment (PPE) and the hazards associated are VERY relevant to anyone using chemicals of any nature. Labels are well and good, but often hard to read or do not contain all the necessary info.
Snip
I understand that you use many dangerous chemicals, as it is part of your job. The average person doesn't have a hope to gain that level of understanding and that is where an SDS is most useful. After all, we can't afford to pay an expert to advise us each time we use a new chemical.
Cheers Peter
|
Hi Peter,
I don't think I said that the SDS was totally useless, I just said that there's a wealth of information on one, much of which a layperson would not understand. Sometime the provision of all this information, much of which, on the first page is quite technical, turns people off reading the important bits, so they don't read them. This negates any good that they do.
I have similar arguments with our OHS people all the time, they are big on SDSs, I point out that much of the information is not relevant to everyday situations and that this information "dilutes" the good stuff to the point of ineffectiveness.
Labelling laws have been tightened up recently in Aus, so there should be PPE and safety information on all but the smallest containers of chemicals, particularly those destined for the consumer market.
Sometimes just large (friendly) letters on the front saying things like "don't drink", "wear XX type of respirator" etc are far more effective means of communication than a five page document.
I'm not a chemical engineer either. You don't need to pay someone to advise you each time you use a new chemical either, RTFL (read the label), if you still are unsure there's a phone number to call the manufacturer. You would probably be pleasantly surprised that they'll help.
But, I think that we basically agree on everything, just a slightly different viewpoint.
Oh, and if anyone on IIS is concerned about a chemical that they are using, or plan to use, feel free to contact me, if I can give advice (i.e. if I know the dangers of the chemical) then I'll happily give it.
Cheers
Stuart
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +10. The time is now 08:51 AM.
|
|